| vwible |
Tue Aug 19, 2014 6:16 am |
|
I'm trying to determine the size of the oil pump in my engine.
The pump body extends about 12.5 mm from the case to the oil pump cover plate. Any ideas as to what size pump it is?
1600 dual relief case, 74 mm stroke, 90.5 pistons.
I did not build it, but am trying to get back to solid running condition.
Oil cooler is a Type IV, using doghouse fan shroud extension kit. |
|
| Greezy Joe |
Tue Aug 19, 2014 6:19 am |
|
| Measure the gear inside in MM and there's your answer :wink: |
|
| vwible |
Tue Aug 19, 2014 6:32 am |
|
| Unfortunately, the engine is assembled and in the bus. |
|
| Glenn |
Tue Aug 19, 2014 6:37 am |
|
vwible wrote: Unfortunately, the engine is assembled and in the bus.
You're SOL. Only way to know is to measure the gears. |
|
| PumaVW79 |
Tue Aug 19, 2014 8:13 am |
|
According Schadek catalog:
8 mm flange = 21 mm pump
12 mm flange = 26 mm pump |
|
Powered by phpBB © 2001, 2005 phpBB Group
|