| Olli from NJ |
Sun Dec 02, 2018 5:19 pm |
|
After all this I will be going with M10 x 1.00 for the vdo t adapter, pressure sensor and idiot light.
Olli |
|
| modok |
Sun Dec 02, 2018 5:46 pm |
|
Put the extra sensors in the oil filter housing, or oil cooler housing.
I don't like to hang more than one thing out of that little 10mm hole, if you crack it....you will be sad. |
|
| Olli from NJ |
Sun Dec 02, 2018 6:04 pm |
|
Oil temp sensor will be in the filter housing.
Olli |
|
| esde |
Sun Dec 02, 2018 8:10 pm |
|
| Yeah, I try to mount all the extra senders in the filter housing. If you strip it, toss it and get another, no big deal. I try to just fit the stock sender to it's port. But, when the threads are loose (like when someone's gronked a 1/8npt fitting in) then I loctite a street elbow or street tee in, and fit the sender to that. The nice thing about using a street tee is that you can fit the sender and a small oil filled mechanical gauge. |
|
Powered by phpBB © 2001, 2005 phpBB Group
|