| pablovent |
Sun Dec 04, 2022 1:50 pm |
|
Hi;
In the photo you can see two crank timing gear spacers, 4mm and 3mm thick......they both do the same job?
My best regards |
|
| jsturtlebuggy |
Sun Dec 04, 2022 2:36 pm |
|
Use the thicker one if you plan on turning more RPM then stock.
VW used the thinner one on later engines, cheaper? Less weight? |
|
| pablovent |
Mon Dec 05, 2022 4:06 am |
|
jsturtlebuggy wrote: Use the thicker one if you plan on turning more RPM then stock.
VW used the thinner one on later engines, cheaper? Less weight?
Thank you!! |
|
| slalombuggy |
Mon Dec 05, 2022 4:59 am |
|
| If you plan on spinning your engine you should be leaving both those spacers in the spares bin and using a solid "racer spacer" |
|
Powered by phpBB © 2001, 2005 phpBB Group
|