1950 11G rear apron fix

[1953Volks]

Hello, I am trying to locate a picture what an original apron looks like from underneath so I can make a apron. My car has the H part retained and I would like to keep it intact. I just need to make the flat part and the portion that rolls underneath the car. I think it should have dimples and drain holes underneath but Im not sure. If anyone has pics I would greatly appreciate it.

_________________
1950 Hoffman 11 G 1-0174999
1953 11G
1955-6 GHIA 1-0925660
1962 DOUBLE CAB
1957 11G
1958 Single cab
1967 camper bus
1959 ragtop 2226460 (in Japan)
1964 Karmann Ghia
1964 Cadillac coupe De Ville (a.k.a. Husslah)

[peter schepens]

Buy a repro and cut out the remains of the H patern.. weld it where you whould weld it...DONE
_________________
Zelensis, glassfibre body made in Belgium , disigned and built on a VW platform About 25 body's built.
Hebmuller info wanted for http://www.hebmueller-registry.com/home.html

[roymartian]

if you can hang on I'll take a picture of mine at weekend

[splitjunkie]

the apron is far from flat. I would also recommend using a donor for the rest.
_________________
Chris

You know, a lot of these scratches will buff right out... Jerry Seinfeld

[Hebster52]

Here's an example of how Wolfparts.com's apron looks. His aprons are 100% idential to originals.

http://wolfparts.com/?product=rear-h-apron

And original.

_________________
~Kris~
The Hebster52
The 912ST
The KidVRod project
The 356 Pre-A replica,SOLD
The 1966 Kommanderwagen, SOLD
The Doppel -67, SOLD
The Singlecab -72, SOLD