| Author |
Message |
DUNTOVFAN
Samba Member
Joined: November 03, 2023
Posts: 61
Location: Fremont
|
 Posted: Tue Nov 28, 2023 2:57 am Post subject: Re: Garage Fest - post recent pics of your garage |
 |
|
|
|
| Back to top |
|
 |
Devon-Dyno-Soar118
Samba Member
Joined: August 30, 2004
Posts: 849
Location: Devon UK
|
| Posted: Tue Nov 28, 2023 1:26 pm Post subject: Re: Garage Fest - post recent pics of your garage |
|
|
Been a very long time since I posted anything on here, thought after nearly 15 years I ought to lol. Here’s my shed. It’s not very tidy, but neither am I
_________________
71 West coast Kombi
54 Oval, 60k km from new
Daves 68 Bug Project
Rust Collector. |
|
| Back to top |
|
|
mg50 
Samba Member
Joined: August 30, 2022
Posts: 649
Location: Southeast
|
| Posted: Thu Dec 21, 2023 6:34 am Post subject: Re: Garage Fest - post recent pics of your garage |
|
|
My new garage. 25x26 with 8ft. walls. Waiting on doors and meeting with electrician today to discuss electrical. Thinking 2 outlets on each wall, 4 led strip lights - spacing them favored toward the back of the building; flush mounted to steel members. Outdoor gooseneck lights over the side door and one centered over the pull up doors.
_________________
1971 Super Beetle & 1971 Karmann Ghia
engine rebuild: https://www.thesamba.com/vw/forum/viewtopic.php?t=775424&highlight= |
|
| Back to top |
|
|
NJ John
Samba Member
Joined: September 21, 2007
Posts: 2227
Location: HdG, MD & NJ
|
| Posted: Thu Dec 21, 2023 8:13 am Post subject: Re: Garage Fest - post recent pics of your garage |
|
|
Sounds like a plan. Just remember, the more outlets, the better.
_________________
1973 standard, yellow, lowered, 3” narrowed front, 1600 blo-thru turbo w/single dell 15.4@86, so far
11.41 et buggy. Long gone
Let’s go O’s! Let’s go O’s!
https://www.youtube.com/@AirSpooledGarage |
|
| Back to top |
|
|
Kafer_Mike
Samba Member
Joined: June 23, 2004
Posts: 348
Location: Noblesville, IN
|
| Posted: Thu Dec 21, 2023 9:09 am Post subject: Re: Garage Fest - post recent pics of your garage |
|
|
I'd suggest wiring a couple dedicated 30A 110v outlet and at least one 22Ov outlets for compressor/welder/plasma cutter.
_________________
Kafer_Mike
Build 'em fast...or let 'em sit. |
|
| Back to top |
|
|
2type2
Samba Member
Joined: June 02, 2002
Posts: 980
Location: SW Colorado
|
| Posted: Thu Dec 21, 2023 9:44 am Post subject: Re: Garage Fest - post recent pics of your garage |
|
|
Outlets on ceiling. Hang 8 led lights around edges and along center, using individual pull string switches.... all the lights you need, where you need it without running everything.
_________________
"A life of peace and happiness depends on your own gratefulness" |
|
| Back to top |
|
|
mg50
Samba Member
Joined: August 30, 2022
Posts: 649
Location: Southeast
|
| Posted: Thu Dec 21, 2023 11:41 am Post subject: Re: Garage Fest - post recent pics of your garage |
|
|
| 2type2 wrote: |
| Outlets on ceiling. Hang 8 led lights around edges and along center, using individual pull string switches.... all the lights you need, where you need it without running everything. |
That's a great idea.
_________________
1971 Super Beetle & 1971 Karmann Ghia
engine rebuild: https://www.thesamba.com/vw/forum/viewtopic.php?t=775424&highlight= |
|
| Back to top |
|
|
cdennisg
Samba Member
Joined: November 02, 2004
Posts: 20282
Location: Sandpoint, ID
|
| Posted: Thu Dec 21, 2023 11:55 am Post subject: Re: Garage Fest - post recent pics of your garage |
|
|
| mg50 wrote: |
| 2type2 wrote: |
| Outlets on ceiling. Hang 8 led lights around edges and along center, using individual pull string switches.... all the lights you need, where you need it without running everything. |
That's a great idea. |
I wired mine in three rows with three switches. That way I can just light up one side where my main bench is, or light up the whole shop if needed.
Also, more outlets than seems necessary, and place them up high to clear any work benches. Set the bottom of the outlet at four feet from the ceiling, that way if you hang sheeting on the walls, you only have three cuts to make it around the outlet. Saves mud and tape time if you hang drywall, too.
_________________
nothing |
|
| Back to top |
|
|
slayer61
Samba Member
Joined: June 01, 2021
Posts: 1018
Location: CA
|
| Posted: Thu Dec 21, 2023 12:03 pm Post subject: Re: Garage Fest - post recent pics of your garage |
|
|
| Kafer_Mike wrote: |
| I'd suggest wiring a couple dedicated 30A 110v outlet and at least one 22Ov outlets for compressor/welder/plasma cutter. |
I get the 220 stuff, but I'm curious. Why 30 amps of 110?
Dedicated, multiple 20 amp circuits makes sense, but I don't get the 30 amps?  
_________________
| Cusser wrote: |
... Most folks are idiots when it deals with electrical !!! |
| 67rustavenger wrote: |
3/4 race cam? What's missing, one of the lobes?  |
Paul
'68 Manx clone... Sears??
2276 built on AS21 case
W-125 w/ GB 1.25:1 rockers
Mahle forged pistons
CB 4340 crank
CB H beam rods
deep sump
44 HPMX
EMPI GTV 2 STG II wedge ports
CB Magna spark
1 5/8 merged collector w/ hater stinger |
|
| Back to top |
|
|
OldSchoolVW's
Samba Member
Joined: July 03, 2020
Posts: 711
Location: San Diego
|
| Posted: Thu Dec 21, 2023 2:29 pm Post subject: Re: Garage Fest - post recent pics of your garage |
|
|
https://www.youtube.com/watch?v=iX3kxAA2L4Q
_________________
Tom
"Following distance is proportional to IQ."
'63 Beetle Sedan
'69 Beetle Sunroof
'70 Beetle Sedan
'73 Type 3 Fastback |
|
| Back to top |
|
|
Kafer_Mike
Samba Member
Joined: June 23, 2004
Posts: 348
Location: Noblesville, IN
|
| Posted: Thu Dec 21, 2023 2:38 pm Post subject: Re: Garage Fest - post recent pics of your garage |
|
|
| slayer61 wrote: |
I get the 220 stuff, but I'm curious. Why 30 amps of 110?
Dedicated, multiple 20 amp circuits makes sense, but I don't get the 30 amps? |
Flexibility to run 110v welders/plasma cutters and compressors. Many of the 140 amp welders and 50 amp plasma cutter manufacturers recommend 30 amp breakers to keep it from tripping too often. Same for some of the larger 110v compressors. They all list 20 amp as the "minimum". For <$50 difference in the breaker and wire (10 guage vs.12 guage) for a 25' run, I would install the dedicated 30 amp circuits.
_________________
Kafer_Mike
Build 'em fast...or let 'em sit. |
|
| Back to top |
|
|
indianpeaksjoe
Samba Member
Joined: July 27, 2017
Posts: 338
Location: Moab, UT
|
| Posted: Sat Dec 23, 2023 9:57 am Post subject: Re: Garage Fest - post recent pics of your garage |
|
|
Spent the morning cleaning up the workbench area. So I should share it before it gets messy again!
-Joe
_________________
Adventures in owning a 66 beetle |
|
| Back to top |
|
|
mg50
Samba Member
Joined: August 30, 2022
Posts: 649
Location: Southeast
|
| Posted: Sat Dec 23, 2023 4:28 pm Post subject: Re: Garage Fest - post recent pics of your garage |
|
|
| indianpeaksjoe wrote: |
Spent the morning cleaning up the workbench area. So I should share it before it gets messy again!
-Joe |
Very cool! Looks like time for a new project to mess it all up!
_________________
1971 Super Beetle & 1971 Karmann Ghia
engine rebuild: https://www.thesamba.com/vw/forum/viewtopic.php?t=775424&highlight= |
|
| Back to top |
|
|
Shonandb
Samba Member
Joined: January 12, 2019
Posts: 1204
Location: Vancouver, BC
|
|
| Back to top |
|
|
obus
Samba Member
Joined: March 08, 2001
Posts: 11072
Location: just off Garden State Parkway Exit 81
|
|
| Back to top |
|
|
WrennMetallWerks
Samba Member
Joined: December 06, 2007
Posts: 2666
Location: Rescue ca
|
|
| Back to top |
|
|
WrennMetallWerks
Samba Member
Joined: December 06, 2007
Posts: 2666
Location: Rescue ca
|
|
| Back to top |
|
|
|
