People Happy with 6430 Dual Webers

[mark40]

My Solex 32's are junk. All kinds of hack repairs etc.

Just wanting an easy start good running stock set up. Are people happy with the 6430 Webers?

https://www.cbperformance.com/product-p/6430.htm

Thanks for any input.

[Mike Fisher]

Solex are Better than Weber!
More of a problem getting the Webers running good!
Have www.Volksbiz.com rebuild your Solex.
_________________
https://imgur.com/user/FisherSquareback/posts
69 FI/AT square Daily Driver
66 sunroof,67,70,71,71,71AT,72,72AT,73 Parts
two 57 oval ragtops sold
'68 Karmann Ghia sold

Society is like stew. If you don't keep it stirred up you end up with a lot of scum on the top! - Russ_Wolfe/Edward Abbey

[Erik G]

for less than that, you can get get good Chinese dual 40 IDF copies, with good center pull linkage

I have used ICT's in the past, they were just OK but I do not think the quality is the same as 20 years ago. I've used Dellorto 34 frd's as well, very similar, and they can work well. Again, at the cost you can now get good chinese IDF clones now
_________________
Stop dead photo links! Post your photos to The Samba Gallery!

[mark40]

[mark40]

[busman78]

I just received the CB Dual Weber ICT kit for my 71 Squareback, currently using a CB Weber kit on my 71 Type 1 and my 71 Type 2, and have used dual ICT / ICH Webers on other VW's in the past, for me Solex's are fodder for a swap meet. Now I prefer the CSP linkage over the pull type offered in any kit currently available on this planet.

[VWporscheGT3]

https://www.ebay.com/itm/204158029344?hash=item2f8...BM3p7Pvp5j

https://www.ebay.com/itm/325631279848?hash=item4bd...BMuuvUvp5j

or

https://www.cbperformance.com/product-p/3170.htm
or

https://www.cbperformance.com/product-p/3111.htm


initial jetting for a 1600 , 115 mains , 45 idles... at 5k altitude i have gotten away with 40 idles and 110 mains.

linkage and air filters are the only thing that you can vary alot.. i have used both the cross bar and csp linkage and have had great success with both. the cb short air filters will be sufficient for a 1600 but you could always go with ramflo style like i have on my 2110.
_________________
Schnell, SCHNELL!

I like being wrong, Because, it is another opportunity to learn. If you stop learning from your mistakes than what is the point?

If you have any questions about Forged ICON 4032 VW pistons just shoot me a line.

[busman78]

I will add that the pull linkage with the CB kit is about the best pull linkage available, but for smoothness, CSP hands down.

[mark40]

[mark40]

[VWporscheGT3]

absolutely. vw engines are undercarbed from the get go. and on my fastback they have been wonderful.

this is the 1600, its not pretty , but it was a great engine. came out still running solid, my favorite thing was the weber sound when you got on it
_________________
Schnell, SCHNELL!

I like being wrong, Because, it is another opportunity to learn. If you stop learning from your mistakes than what is the point?

If you have any questions about Forged ICON 4032 VW pistons just shoot me a line.