Pics of headlight harness installed

[Vndlfsn]

I bought the Aftermarket wiring harness intended to improve delivery of power to the headlights and installed over the weekend. Easy job for a moderate DIYer.

Instructions were ok. I utilized a couple of electrical items as anchors for the harness climbing out of the driver’s side headlight.

Then I gently thread the passenger’s end through close to the firewall but avoiding the moving parts of the windscreen wipers and then down the opposite side to the passenger’s side.

I mounted zip ties around the harness at different points along the way but didn’t pull them tight until I was done.

Finall, I made the connections to the battery and gently coiled up the extra harness with the fuses and secured it near the battery

I hope this is helpful to anyone thinking about doing it!