Axle Question.

[WaterBuggy_24]

If I'm using the stock beetle irs and engine cradle with a t-1 transaxle. What length axles shafts would I need? I have stock ×1 trailing arms and bus cv joints.
_________________
One day, I may learn.
Probably not today though.

[Schepp]

What length are on there currently? If you're unsure you could take one off and measure it.

Some older posts suggest that the axle length is T-1 stock with stock T-1 CV's.
https://www.thesamba.com/vw/forum/viewtopic.php?t=379087&start=0

https://www.thesamba.com/vw/forum/viewtopic.php?t=342288&start=0

I'm using stock T-1 boxed arms with T-2 CV's & T-181 axles.

[jsturtlebuggy]

The best way to find correct axle length, is to align CV flanges across from each other and take a measurement between center of flanges and subtract 1/4-1/2in for axle length you need.
_________________
Joseph
Fair Oaks/Orangevale, CA
Elrod Motorsports
Motion Tire Motorsports
Having fun with Dune Buggies since 1970
Into Volkswagens since 1960

[WaterBuggy_24]

[Crogg]

You have a bus tranny and your putting in a type 1????? I would rethink this! Busses can go highway speeds! I only use bus transmissions in my builds. Try a taller tire!