| Author |
Message |
beetleboy58
Samba Conquestador
Joined: February 27, 2006
Posts: 1073
|
 Posted: Sun Dec 16, 2007 3:08 pm Post subject: |
 |
|
| justinmcallister wrote: |
Ok i was just looking through the racing picture gallery and saw these pictures posted by Jeff Denham. These have to be the craziest 041 heads ever!!
|
Those are frigging sweet. Probably undriveable except in a straight line, wide-open.  |
|
| Back to top |
|
 |
BFB
Samba Member
Joined: November 03, 2014
Posts: 2519
|
| Posted: Fri May 16, 2025 7:04 pm Post subject: Re: how big can you port stock heads? |
|
|
Ok, now this deserves to be brought up from the grave
_________________
"how am i supposed to torque the rear wheel nut to 250 ft lbs??? " - clonebug
An interesting thing happens in forums where everyone starts parroting the same thing and "common knowledge" takes over.
Most experts aren't. |
|
| Back to top |
|
|
Brian_e 
Samba Member
Joined: July 28, 2009
Posts: 3898
Location: Rapid City, South Dakota
|
| Posted: Fri May 16, 2025 8:24 pm Post subject: |
|
|
| stevetim wrote: |
Here's a spread port buildt in 1976.
|
I like these. Perfectly round, straight shot, and minimal port volume. I would guess those heads were killers.
RIP Steve. 
I like how the guy who started this thread has now come a really long ways in 18 years. 
Brian
_________________
So more or less the lazier and stupider you want to be, the nicer quality parts you need to buy.
-Modok
www.type-emotorsports.com
Type E Engine Parts and Supplies
https://type-emotorsports.com/collections/engine-parts |
|
| Back to top |
|
|
BFB
Samba Member
Joined: November 03, 2014
Posts: 2519
|
| Posted: Sat May 17, 2025 6:35 pm Post subject: Re: how big can you port stock heads? |
|
|
Yeh i thought those looked cool. Looks like plugs are angled too?
_________________
"how am i supposed to torque the rear wheel nut to 250 ft lbs??? " - clonebug
An interesting thing happens in forums where everyone starts parroting the same thing and "common knowledge" takes over.
Most experts aren't. |
|
| Back to top |
|
|
|
