| Author |
Message |
Schepp
Samba Member
Joined: March 22, 2020
Posts: 800
Location: NorCal
|
 Posted: Thu May 22, 2025 7:37 am Post subject: Re: 1961 class 11 project |
 |
|
| What your plan for front suspension limiters? I don't see any bumps or straps in place. |
|
| Back to top |
|
 |
ORANGECRUSHer
Samba Member
Joined: June 09, 2006
Posts: 3711
Location: West Coast (Michigan's)
|
| Posted: Thu May 22, 2025 9:23 am Post subject: Re: 1961 class 11 project |
|
|
I'm a little late, but I'm wondering how your pressure washer blaster worked out. Would you do it again?
Ive seen short videos of them in action and it looks like it goes very slow.
_________________
Brian H.
OrangeCrushERBerrien Warrior-2.4L Quad4-2x3 arms-1.5Fox coilovers-094-930CVs
LAZY MARY1970 Baja 2110cc-82mm CB forged crank-AA pistons/cylinders-Grant rings-1.1 vw rockers-CB serpkit-CB chromoly PRs-CB maxiflow filter pump-wix51515 filter-Dual 44IDF-cut/turned front beam-AEM wideband-Auber CHT-Donaldson Dual PowerCore filters-custom AL air boxes |
|
| Back to top |
|
|
volkswagenut
Samba's Big Jerk
Joined: November 12, 2002
Posts: 3543
Location: Tennessee
|
| Posted: Sun May 25, 2025 4:27 pm Post subject: Re: 1961 class 11 project |
|
|
| Schepp wrote: |
| What your plan for front suspension limiters? I don't see any bumps or straps in place. |
I plan on getting straps to run on the front once I get it sat down and can see where I’m at.
_________________
We are a Republic, NOT a Democracy |
|
| Back to top |
|
|
volkswagenut
Samba's Big Jerk
Joined: November 12, 2002
Posts: 3543
Location: Tennessee
|
| Posted: Sun May 25, 2025 4:29 pm Post subject: Re: 1961 class 11 project |
|
|
| ORANGECRUSHer wrote: |
I'm a little late, but I'm wondering how your pressure washer blaster worked out. Would you do it again?
Ive seen short videos of them in action and it looks like it goes very slow. |
It worked ok…. I feel the sand / media I used ( bagged sand from Home Depot ) was not ideal and caused most my issues. Get some good media I feel it would work way better.
_________________
We are a Republic, NOT a Democracy |
|
| Back to top |
|
|
volkswagenut
Samba's Big Jerk
Joined: November 12, 2002
Posts: 3543
Location: Tennessee
|
| Posted: Sat Aug 02, 2025 7:43 pm Post subject: Re: 1961 class 11 project |
|
|
Little bit more progress , cage is about 90% . Custom seat rails with 6” actuators will get us powered master craft seats.
_________________
We are a Republic, NOT a Democracy |
|
| Back to top |
|
|
|
