Hello! Log in or Register   |  Help  |  Donate  |  Premium Membership  |  Buy Shirts See all banner ads | Advertise on TheSamba.com  
TheSamba.com
 
Adjusting Clutch Pushrod/Pedal Freeplay
Page: Previous  1, 2
Forum Index -> Vanagon Share: Facebook Twitter
Reply to topic
Print View
Quick sort: Show newest posts on top | Show oldest posts on top View previous topic :: View next topic  
Author Message
mike1679
Samba Member


Joined: June 01, 2008
Posts: 7
Location: Hoboken
mike1679 is offline 

PostPosted: Mon Jun 02, 2008 2:05 pm    Post subject: Reply with quote

So Ceebers excessive freeplay and my negative freeplay come from mixing & matching brand names? The Bus Depot sent me a PEX master with a 1/4" deep hole in the top of the cylinder for the pushrod, The old one in my '85 has a hole about an inch deep.
Back to top
View user's profile Send private message Classifieds Feedback
kenmag
Samba Member


Joined: March 12, 2007
Posts: 275
Location: Toronto, Canada
kenmag is offline 

PostPosted: Mon Jun 02, 2008 4:20 pm    Post subject: Re: Clutch master cylinder leak Reply with quote

mike1679 wrote:
I found brake fluid dripping from my clutch master cylinder, so I am putting in a replacement. I found there is no freeplay between the push rod and the piston, I have to compress the spring in order to get it bolted in place. During the bleeding process, I am still getting a drip on the floor. With a new master, where else can it be leaking from? Is the lack of free play causing this? Now to crawl under and try to adjust.


Check if you have copper washers on both sides of the banjo fitting and that its properly torqued. Also check to see if the fluid supply hose from the reservoir is leaking. The ends could be cracked, so you could cut a bit off to get a fresh end until you get a new hose.
_________________
87GL Westy/suby ej22
87GL tintop/suby ej22
05 Golf TDI
95 jetta GLX
Back to top
View user's profile Send private message Visit poster's website Gallery Classifieds Feedback
Alan Brase
Samba Member


Joined: March 28, 2004
Posts: 4573
Location: Cedar Falls, Iowa
Alan Brase is offline 

PostPosted: Mon Jun 02, 2008 6:32 pm    Post subject: Reply with quote

mike1679 wrote:
So Ceebers excessive freeplay and my negative freeplay come from mixing & matching brand names? The Bus Depot sent me a PEX master with a 1/4" deep hole in the top of the cylinder for the pushrod, The old one in my '85 has a hole about an inch deep.

I was talking about the the slave cylinders. I've not had this problem with the master cylinders.
Al
_________________
Al Brase
Projects: 67 sunroof bug, 67 Porsche 912 Targa, 70 Westy
Dec 1955 Single Cab pickup WANT 15" BUS RIMS dated 8/55, thru 12/55
To New owners: 1969 doublecab, 1971 Dormobile
Vanagons:
80 P27 Westy JUL 1979, 3rd oldest known US
83 1.6TD Vanagon, 87 Wolfie Westy daily driver, swap meet home
Back to top
View user's profile Send private message Send e-mail Gallery Classifieds Feedback
Display posts from previous:   
Reply to topic    Forum Index -> Vanagon All times are Mountain Standard Time/Pacific Daylight Savings Time
Page: Previous  1, 2
Page 2 of 2

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum

About | Help! | Advertise | Donate | Premium Membership | Privacy/Terms of Use | Contact Us | Site Map
Copyright © 1996-2025, Everett Barnes. All Rights Reserved.
Not affiliated with or sponsored by Volkswagen of America | Forum powered by phpBB
Links to eBay or other vendor sites may be affiliate links where the site receives compensation.