Stock tail lights.

Tompkins · Posted: Wed Jan 26, 2011 1:19 pm Post subject: Stock tail lights.

I see allot of people with stock tail light on there Bajas will that work on this kit?

http://www.chircoestore.com/catalog/product_info.php?cPath=64_65&products_id=1803

bartman · Posted: Wed Jan 26, 2011 1:35 pm Post subject:

You need a certain angle for stock lights to look right. That fender looks too flat at the rear. Hard to tell, though.

If you gotta have that specific kit, you could use tab-mount lights off the bumper. Or look for an acceptable aftermarket fender-mount alternative. Walmart and especially truck stops can provide ideas.

Tompkins · Posted: Wed Jan 26, 2011 1:37 pm Post subject:

bartman · Posted: Wed Jan 26, 2011 1:40 pm Post subject:

That fender looks a lot like user Auslander's. Is that the stock bolt pattern? You could ask him if he had stock lights on it. He might know if its the same kit

Image may have been reduced in size. Click image to view fullscreen.

kbwakesk8 · Posted: Wed Jan 26, 2011 1:44 pm Post subject:

Tompkins · Posted: Wed Jan 26, 2011 1:44 pm Post subject:

bartman · Posted: Wed Jan 26, 2011 1:46 pm Post subject:

--------

Tompkins · Posted: Wed Jan 26, 2011 1:49 pm Post subject:

shred625 · Posted: Wed Jan 26, 2011 1:56 pm Post subject:

You are better off not mounting anything that heavy on fiberglass. I would suggest putting some cheap trailer/buggy lights on your rear cage.
_________________
“It takes a big man to cry, but it takes a bigger man to laugh at that man.”
~ Jack Handey

thext94 · Posted: Wed Jan 26, 2011 2:26 pm Post subject:

An alternative

I think fiberglass fenders would be too flimsy to mount that heavy of a light on. it would bounce around. There isn't a need for all 4 tail lights, I've been meaning to wire them as blinkers and brakelight combos. never got around to it...

Shifty2006 · Posted: Wed Jan 26, 2011 3:54 pm Post subject:

This is my cage and tail lights that work as tail lamps and brake lights they look like clear led but their red.
_________________
63 baja (r.i.p)
64 baja (sold)
70 baja (sadly gone)
project of pieces to be assemble to someday be a baja (inprogress)

tanner_122 · Posted: Wed Jan 26, 2011 4:20 pm Post subject:

My friend blake has stock tail lights... I think that was part of the reason for this... Twisted Evil

_________________
91 jeep Cherokee "TANK"

thext94 · Posted: Wed Jan 26, 2011 4:22 pm Post subject:

Lotrat · Posted: Wed Jan 26, 2011 6:01 pm Post subject:

They don't fit exactly flush, but you don't notice it.

CHEVYJEFF · Posted: Thu Jan 27, 2011 7:40 am Post subject:

I went w/ 60's style on my fiberglass fenders, I reinforced the area where they mount w/ some generic hose hooks from tractor supply that were on sale for a dollar. Once its all tightened up I can lean against the fenders and they are solid. Call it the beer buzz lean test..lol

onaXR · Posted: Sat Jan 29, 2011 5:32 am Post subject:

Tompkins · Posted: Sat Jan 29, 2011 9:37 am Post subject:

thext94 · Posted: Sat Jan 29, 2011 10:17 am Post subject:

here's an old pic but you can see the lights better

Tyler

tanner_122 · Posted: Sat Jan 29, 2011 10:39 am Post subject:

Mines similar to tylers^^^

There pretty dam bright to!!
... Don't pay attention to the motor mess Laughing

_________________
91 jeep Cherokee "TANK"

CLASSIC CAR GUY · Posted: Sun Jan 30, 2011 12:12 am Post subject:

_________________
(0\!/0)
58' Rag'
60' Type 1
61' Type 1
62' Type 1
64' Type 1
66' Type 1
66' Vert'
67' Type 1

"every one wants to reinvent the wheel, but nobody knows how to make it round"

Vintage Volkswagen Sales and Service as well as Classics and Muslcecars all located here in Phoenix Arizona at www.rpmotorcars.com


Hello! Log in or Register \| Help \| Donate \| Premium Membership \| Buy Shirts	See all banner ads \| Advertise on TheSamba.com

	Forum Index -> HBB Off-Road	All times are Mountain Standard Time/Pacific Daylight Savings Time
Page 1 of 1