Author |
Message |
Mr. Electric Wizard Samba Member
Joined: August 07, 2003 Posts: 2846 Location: Smyrna, TN
|
Posted: Tue May 22, 2018 11:56 am Post subject: Rectangular mirrors (with ball)? |
|
|
The aftermarket round mirrors pretty much blow, unless someone has come out with any new quality ones.
I saw a bus the other day that had some rectangular mirros with the ball end that would work with stock arms.
Does anyone know where to get these?
Thanks! _________________ "Saying what we think gives us a wider conversational range than saying what we know."
~ Cullen Hightower
(T)exas (C)oalition (B)uses
(H)eidenhammer (B)ully (B)oyz
--1966 De Luxe Camper |
|
Back to top |
|
|
DadaCheese Samba Member
Joined: April 15, 2008 Posts: 837 Location: Richmond, CA
|
Posted: Tue May 22, 2018 12:16 pm Post subject: Re: Rectangular mirrors (with ball)? |
|
|
This is what I use (below).
...the first set of these I got I bought at a Pep Boys, more recently I found them for $10- $13 each at someplace like O'Reilly's
(The Irish are world-renowned as great car mechanics?!?!??).
As I hope you can see from the photo, I use original-style clamps, but with an extra nut or two. Works great.
This link below is basically it (from Pep Boys), but with additional hardware you wouldn't need, for $18
https://www.pepboys.com/product/details/1223565/00968?quantity=1
On-line I've also seen ones which are the same, but instead of chrome backing, have kind of a glossy black finish instead (and no extra hardware) for $17:
https://www.amazon.com/Grote-12072-Rolled-Rim-Mirr...4Z621ES264
_________________ ----------------------------------------------------------
Dada as in dadaism.
Cheese as in the stuff I love to eat.
Last edited by DadaCheese on Tue May 22, 2018 1:03 pm; edited 1 time in total |
|
Back to top |
|
|
DadaCheese Samba Member
Joined: April 15, 2008 Posts: 837 Location: Richmond, CA
|
Posted: Tue May 22, 2018 1:00 pm Post subject: Re: Rectangular mirrors (with ball)? |
|
|
...found exactly what I am currently using on Amazon ("Prime" no less) for $7.50:
https://www.amazon.com/CIPA-95117-Replacement-Head...F8H8JWQ6Q7
If you'd like, I can snap a couple detailed pictures this evening of how I am using the original clamps with this type.
Stock? No way.
Cheap? YES.
Usable? Also yes. _________________ ----------------------------------------------------------
Dada as in dadaism.
Cheese as in the stuff I love to eat. |
|
Back to top |
|
|
Mr. Electric Wizard Samba Member
Joined: August 07, 2003 Posts: 2846 Location: Smyrna, TN
|
Posted: Tue May 22, 2018 5:18 pm Post subject: Re: Rectangular mirrors (with ball)? |
|
|
Nice, Mr. Cheese.
I love how those look. I have some of those commercial mirror arms that I want to use these with.
Thanks! _________________ "Saying what we think gives us a wider conversational range than saying what we know."
~ Cullen Hightower
(T)exas (C)oalition (B)uses
(H)eidenhammer (B)ully (B)oyz
--1966 De Luxe Camper |
|
Back to top |
|
|
DadaCheese Samba Member
Joined: April 15, 2008 Posts: 837 Location: Richmond, CA
|
Posted: Tue May 22, 2018 6:37 pm Post subject: Re: Rectangular mirrors (with ball)? |
|
|
Of course you may go a different route entirely, but here's some close ups...
It looks like on my driver's side I am using my original clamp with a ball bearing, and on the passenger's side, I placed some kind of rounded threaded cap that is roughly the size of a ball bearing on the passrnger's side. That newer clamp is from Wolfsburg West.
_________________ ----------------------------------------------------------
Dada as in dadaism.
Cheese as in the stuff I love to eat. |
|
Back to top |
|
|
ToolBox Samba Member
Joined: January 27, 2004 Posts: 3439 Location: Detroit, where they don't jack parts off my ride in the parking lot of the 7-11
|
Posted: Wed May 23, 2018 9:59 am Post subject: Re: Rectangular mirrors (with ball)? |
|
|
I am running round mirrors from a Unimog. About $40 a set and a little bigger than a stock Bus mirror.
https://expedition-imports.com/0008111530
|
|
Back to top |
|
|
Malokin Martin Samba Member
Joined: August 19, 2007 Posts: 3100 Location: E-burg
|
Posted: Wed May 23, 2018 11:31 am Post subject: Re: Rectangular mirrors (with ball)? |
|
|
It’s unfortunate those don’t come in chrome. The look way more quality that the garbage we currently have available |
|
Back to top |
|
|
Mr. Electric Wizard Samba Member
Joined: August 07, 2003 Posts: 2846 Location: Smyrna, TN
|
Posted: Sun May 27, 2018 11:29 am Post subject: Re: Rectangular mirrors (with ball)? |
|
|
ToolBox wrote: |
I am running round mirrors from a Unimog. About $40 a set and a little bigger than a stock Bus mirror.
|
I like those actually!
Do you have yours mounted to stock arms? _________________ "Saying what we think gives us a wider conversational range than saying what we know."
~ Cullen Hightower
(T)exas (C)oalition (B)uses
(H)eidenhammer (B)ully (B)oyz
--1966 De Luxe Camper |
|
Back to top |
|
|
LAGrunthaner Samba Member
Joined: March 18, 2007 Posts: 5509 Location: 1st Coast
|
|
Back to top |
|
|
ToolBox Samba Member
Joined: January 27, 2004 Posts: 3439 Location: Detroit, where they don't jack parts off my ride in the parking lot of the 7-11
|
Posted: Thu May 31, 2018 9:11 am Post subject: Re: Rectangular mirrors (with ball)? |
|
|
Malokin Martin wrote: |
It’s unfortunate those don’t come in chrome. The look way more quality that the garbage we currently have available |
They come apart easy enough to send out to a chromer.
Mr. Electric Wizard wrote: |
ToolBox wrote: |
I am running round mirrors from a Unimog. About $40 a set and a little bigger than a stock Bus mirror.
|
I like those actually!
Do you have yours mounted to stock arms? |
They fit stock arms without any issues. |
|
Back to top |
|
|
BulliBill Samba Member
Joined: July 09, 2004 Posts: 4574 Location: St Charles, MO
|
Posted: Thu May 31, 2018 3:01 pm Post subject: Re: Rectangular mirrors (with ball)? |
|
|
I too like the look of those Unimog green mirrors. But I like the look of the stock unit a little more. Can anyone comment on the quality of the current Wolfsburg West reproduction of the stock round polished aluminum mirror ? I'm about to get those dumb vibrating elephant ear reproductions off my '67 Camper (been on there for over 34 years now) and put stock arms and those round mirror heads on (if they are any good?).
Bill Bowman _________________ I'm looking for these license plate frames for my fleet:
Coeur D'Alene - Lake Shore Volkswagen
Mission VW - San Fernando
Thornton VW - Stockton
Thanks for any help! |
|
Back to top |
|
|
Mr. Electric Wizard Samba Member
Joined: August 07, 2003 Posts: 2846 Location: Smyrna, TN
|
Posted: Thu May 31, 2018 5:37 pm Post subject: Re: Rectangular mirrors (with ball)? |
|
|
BulliBill wrote: |
I too like the look of those Unimog green mirrors. But I like the look of the stock unit a little more. Can anyone comment on the quality of the current Wolfsburg West reproduction of the stock round polished aluminum mirror ? I'm about to get those dumb vibrating elephant ear reproductions off my '67 Camper (been on there for over 34 years now) and put stock arms and those round mirror heads on (if they are any good?).
Bill Bowman |
The question of the century (every few years for me).
Who's got the best round reproduction round mirrors these days.
I've had sooo many crap ones over the years. _________________ "Saying what we think gives us a wider conversational range than saying what we know."
~ Cullen Hightower
(T)exas (C)oalition (B)uses
(H)eidenhammer (B)ully (B)oyz
--1966 De Luxe Camper |
|
Back to top |
|
|
hitest Samba Member
Joined: September 30, 2008 Posts: 10296 Location: Prime Meridian, ID
|
Posted: Thu May 31, 2018 6:14 pm Post subject: Re: Rectangular mirrors (with ball)? |
|
|
This is what some of us have wanted to see:
_________________
EverettB wrote: |
I wonder what the nut looks like.
|
'62 L390 151, '62 L469 117, '63 L380 113, '64 L87 311, '65 L512 265, '65 L31 SO-42, '66 L360 251, '68 L30k 141, '71 L12 113, '74 ORG 181
FU#5 |
|
Back to top |
|
|
hitest Samba Member
Joined: September 30, 2008 Posts: 10296 Location: Prime Meridian, ID
|
Posted: Thu May 31, 2018 6:17 pm Post subject: Re: Rectangular mirrors (with ball)? |
|
|
Mr. Electric Wizard wrote: |
BulliBill wrote: |
I too like the look of those Unimog green mirrors. But I like the look of the stock unit a little more. Can anyone comment on the quality of the current Wolfsburg West reproduction of the stock round polished aluminum mirror ? I'm about to get those dumb vibrating elephant ear reproductions off my '67 Camper (been on there for over 34 years now) and put stock arms and those round mirror heads on (if they are any good?).
Bill Bowman |
The question of the century (every few years for me).
Who's got the best round reproduction round mirrors these days.
I've had sooo many crap ones over the years. |
Many folks have shared that the only way to go are the mirror heads machined in one piece- ball and all. If the ball mount is riveted, stamped or added to the mirror housing in any way- plan on sooner or later disappointment. _________________
EverettB wrote: |
I wonder what the nut looks like.
|
'62 L390 151, '62 L469 117, '63 L380 113, '64 L87 311, '65 L512 265, '65 L31 SO-42, '66 L360 251, '68 L30k 141, '71 L12 113, '74 ORG 181
FU#5 |
|
Back to top |
|
|
|