| Author |
Message |
WithTheFlow
Samba Member
Joined: March 04, 2016
Posts: 197
Location: Wisconsin
|
 Posted: Tue Jul 16, 2019 10:57 pm Post subject: Re: Subaru Swap |
 |
|
| skills@eurocarsplus wrote: |
| WithTheFlow wrote: |
| Thoughts? |
go for the 2.5 I wouldn't mess with what you have |
I put the 1.8 for sale. Maybe someone will want it for their bug
_________________
The fastest thing you can do is slow down.
“The secret is here in the present. If you pay attention to the present, you can improve upon it. And, if you improve on the present, what comes later will also be better."
-- The Alchemist” |
|
| Back to top |
|
 |
Wags74
Samba Member
Joined: May 09, 2018
Posts: 9
Location: VA
|
| Posted: Mon Dec 16, 2019 7:42 am Post subject: Re: Subaru Swap |
|
|
| Has anyone ever used the fuel pump from a Subaru? I pulled the pump assembly out of my donor car and separated the pump from it. The only place I see for a potential issue is on the suction end where it looks like the shaft comes through the case. When i have a chance I'm going to hook some hoses to it and pump water through it to see if it leaks. Unless someone with more experience tells me this is a bad idea. |
|
| Back to top |
|
|
clonebug
Samba Member
Joined: January 29, 2005
Posts: 4130
Location: NW Washington
|
| Posted: Mon Dec 16, 2019 8:49 am Post subject: Re: Subaru Swap |
|
|
Pumping water through a fuel pump will kill it.
_________________
| richardcraineum wrote: |
| I'm so ignorant of efi I don't even know the difference between batch, sequential blah blah blah .. |
| cbeck wrote: |
| His user name in a previous life was dick head. |
My Megasquirt Fuel Injection Turbo Buggy Build
Water/Alcohol Injection
Audi TT intercooler
Upgraded to MS3Pro-Evo
EcuMaster PMU16
ECUMaster ADU5 Digital Dash
http://www.shoptalkforums.com/viewtopic.php?f=3&t=127936 |
|
| Back to top |
|
|
Wags74
Samba Member
Joined: May 09, 2018
Posts: 9
Location: VA
|
| Posted: Mon Dec 16, 2019 11:01 am Post subject: Re: Subaru Swap |
|
|
| Good to know. I don't want to pump gas through it near an open container because the terminals are exposed. Is there anything I can use? Looking for something with a really low viscosity. |
|
| Back to top |
|
|
|
