Author |
Message |
toddhegstrom Samba Member
Joined: August 11, 2002 Posts: 44
|
Posted: Mon Jun 23, 2025 12:39 pm Post subject: Front turn signal bulb connection |
|
|
Both my bulb holders 63 ghia have no contacts for the bulb contacts to sit against. Previous owner had soldered wires directly to the two bulb contact (dual filament ). Cant see how the wires were connected to the bulb holder. Is that connection piece I can find. ?Any ideas ?
|
|
Back to top |
|
 |
22manybugs Samba Member

Joined: March 30, 2006 Posts: 398 Location: Yorba Linda, Calif
|
Posted: Mon Jun 23, 2025 4:17 pm Post subject: Re: Front turn signal bulb connection |
|
|
Never seen that before. Pretty ingenious/desperate!
This might be what you need: https://www.mtmfg.com/part/view/lenses-and-seals-f...amp;src=96
Looks like it is supposed to attach where the nubs are next to the bulb. Are those screw heads? I can't tell. You may have to drill out the nub and tap a thread to screw in the contact unit. _________________ Lon
1969 Karmann Ghia convertible
1971 Westfalia camper |
|
Back to top |
|
 |
|