| Author |
Message |
Central Syncronizer
Samba Member
Joined: November 19, 2008
Posts: 302
Location: Vancouver
|
 Posted: Wed Oct 26, 2011 4:56 pm Post subject: Re: 14mm |
 |
|
| Christopher Schimke wrote: |
| mtwrench540 wrote: |
| good luck on 14mm bolt,vw and porsche have not used this size since the 60's.if you cannot find one pm me. dave griffin |
Japanese cars use loads of 14mm headed bolts. |
My old SVX has already made the ultimate sacrifice, I'm glad it will have one more use to me.
thanks again
_________________
Ongoing restoration/maintenance of my syncro double cab (and soon Westy):
http://88syncrodoka.blogspot.com/ |
|
| Back to top |
|
 |
Christopher Schimke
Samba Member
Joined: August 03, 2005
Posts: 5549
Location: PNW
|
| Posted: Wed Oct 26, 2011 3:41 pm Post subject: Re: 14mm |
|
|
| mtwrench540 wrote: |
| good luck on 14mm bolt,vw and porsche have not used this size since the 60's.if you cannot find one pm me. dave griffin |
Japanese cars use loads of 14mm headed bolts.
_________________
"Sometimes you have to build a box to think outside of." - Bruce (not Springsteen)
*Custom wheel hardware for Audi/VW, Porsche and Mercedes wheels - Urethane Suspension Bushings*
T3Technique.com or contact me at [email protected] |
|
| Back to top |
|
|
bosruten
Samba Member
Joined: February 11, 2011
Posts: 562
|
| Posted: Wed Oct 26, 2011 3:38 pm Post subject: |
|
|
I just use vice grips 
_________________
'87 Syncro Weekender |
|
| Back to top |
|
|
mtwrench540
Samba Member
Joined: October 25, 2009
Posts: 351
Location: monterey,va
|
| Posted: Wed Oct 26, 2011 3:33 pm Post subject: 14mm |
|
|
good luck on 14mm bolt,vw and porsche have not used this size since the 60's.if you cannot find one pm me. dave griffin
_________________
87 wolfsberg,74 181w/1915 and lots of patina! learned to fix vw's from hot vw mag in 1964,VWOA instructor,DSM,69 to73,service mgr at different porsche-audi dealers etc,etc,now retired!!! first vw new 64,transplanted 356 eng in 65,400characters are not enough space!! |
|
| Back to top |
|
|
Central Syncronizer
Samba Member
Joined: November 19, 2008
Posts: 302
Location: Vancouver
|
| Posted: Wed Oct 26, 2011 2:21 pm Post subject: |
|
|
Right on, even better than I'd hoped. Thanks for that. I like the idea of using an old 14 mm bolt and keeping the money the tool would have cost.
cheers
Jay
_________________
Ongoing restoration/maintenance of my syncro double cab (and soon Westy):
http://88syncrodoka.blogspot.com/ |
|
| Back to top |
|
|
tomkat73
Samba Member
Joined: June 12, 2011
Posts: 124
Location: White Salmon, WA
|
|
| Back to top |
|
|
Central Syncronizer
Samba Member
Joined: November 19, 2008
Posts: 302
Location: Vancouver
|
| Posted: Wed Oct 26, 2011 11:18 am Post subject: Camber adjustment bolt size? |
|
|
I'm hoping someone can pass on the size of the allen key for the camber adjustment bolt. (front on my Syncro of course)
cheers and thanks
Jay
_________________
Ongoing restoration/maintenance of my syncro double cab (and soon Westy):
http://88syncrodoka.blogspot.com/ |
|
| Back to top |
|
|
|
