raders on early cars

[crewlvw]

where can i get the right lug nuts fo my raders? i got them from cp 1 a year ago and just had the tires mounted i got lug nuts with the wheels but the lugs have 7/16 in sholder so i have to run 1/2 in spacers in the back i dont want to do that. i have a 54 oval now i have to change my front drums yuk .i just spent 600+ on brake stuff and i'm not putting spacers on the front. any body else with this problem? what did you do to fix it. billy

[Bryan67]

Any place that sells custom wheels or even a parts store will have them. They are nothing special.
_________________
If you`re going to do something, do it right.

[mbugz60]

I just put a set of original empi raders on my 52. I took the lugs that are supplied in the Bug Pack kit 6540-20 and cut 3/16 off of the end and reshaped them. Worked perfectly.
_________________
Mike

[TyeDyeBug]

hollow out the center of the rim a little and shorten the dust cap by shaving down the open end a little. it worked on mine.

[crewlvw]

i dont know about shaving the rim that might weaken it.