What P/C's are these?

hazetguy · Posted: Thu Nov 21, 2002 8:39 am Post subject: What P/C's are these?

Well it may not be all that "performance" related, unless comparing it to a 25hp, but...what are these pistons/cylinders? They are 77mm, but have the 22mm sized wrist pins. It seems like they should be 40hp, but the wrist pins are too large. The CYLINDERS have a "raised top" ring looking thing on the top of them, kinda like the top of those oil booster pressure relief valves. Sorry, but I have no pics. Thanks.

keifernet · Posted: Thu Nov 21, 2002 8:46 am Post subject: What P/C's are these?

Without seeing them I cannot be 100% sure but they sound like 1300cc to me....

keifernet · Posted: Thu Nov 21, 2002 1:55 pm Post subject: What P/C's are these?

after doing a bit of research (wrist pin diameter tells the tale) I would say Yes they are definantly 1300 cc models.... they were on 66 models here and used extensively in Europe and other areas of the world...

Intersetingly I have a pair of dual port 1300 heads that came on an engine that must have been shipped over here from the UK or other... are you using these P/C's or wanting to get rid of them????

hazetguy · Posted: Thu Nov 21, 2002 6:15 pm Post subject: What P/C's are these?

yeah, i think so too. i don't have a bug parts book, but i compared them to another set of used 1300 p/c and they were the same.
thanks


Hello! Log in or Register \| Help \| Donate \| Premium Membership \| Buy Shirts	See all banner ads \| Advertise on TheSamba.com

Forum Index -> Performance/Engines/Transmissions		Share:
		Print View

	Forum Index -> Performance/Engines/Transmissions	All times are Mountain Standard Time/Pacific Daylight Savings Time
Page 1 of 1