Home brew hoses?

SGKent · Posted: Tue Jun 30, 2009 10:07 pm Post subject: Home brew hoses?

This came out of the hose mess on our 1977 Bay. I believe it is a water cooled engine T but since I don't know every smog T by heart, anyone recognize it as legit ACVW for FI? Small opening is roughly 10mm and large 14mm.

Image may have been reduced in size. Click image to view fullscreen.

_________________
“Most people don’t know what they’re doing, and a lot of them are really good at it.” - George Carlin

renobdarb · Posted: Tue Jun 30, 2009 10:37 pm Post subject:

Does your bus still have FI?
_________________
----------
1978 Campmobile, 2000cc w/hydro lifters, dual Weber 44 IDF carbs (50 idle jets, 115 main jets), SVDA distributor w/Compufire.

SGKent · Posted: Tue Jun 30, 2009 10:55 pm Post subject:

my bus engine is apart. We are restoring the FI and are cleaning up bits and pieces. This "T" fitting came out of the mess. I don't recognize it but want to be sure it isn't something I need before tossing it into the pile of want no more parts.
_________________
“Most people don’t know what they’re doing, and a lot of them are really good at it.” - George Carlin

vw76westy · Posted: Wed Jul 01, 2009 12:31 am Post subject:

i used somthing simular
as a temp until i could find another original one of these Y-connectors

its on the left side of throttle body housing

SGKent · Posted: Wed Jul 01, 2009 7:32 pm Post subject:

so no one recognizes it? I thought so, water cooled part in an ACVW. Sacrilege. No wonder it died.

_________________
“Most people don’t know what they’re doing, and a lot of them are really good at it.” - George Carlin


Hello! Log in or Register \| Help \| Donate \| Buy Shirts	See all banner ads \| Advertise on TheSamba.com

	Forum Index -> Bay Window Bus	All times are Mountain Standard Time/Pacific Daylight Savings Time
Page 1 of 1