Power lock harness connector?

[mrjoshida]

I'm installing a keyless entry system into my 91 Weekender, and I was hoping to just tap into the existing wiring harness connector. It's real close to a PC molex connector, and I found some 1.57mm pins that fit, but shell doesn't want to connect nice. It seems like maybe the pin spacing is just a bit off and the locking tabs on the Vanagon side get in the way. I've been unsuccessful in finding the appropriate connectors anywhere - has anyone found a connector that fits well? Any parts numbers of model information I should be looking for? Thanks!

[ALIKA T3]

I have plenty pig tails from donors, send me a pm with what you're looking for.
I can also de-pin it for an extra fee and supply it with new pins to crimp.
_________________
Silicone Steering Boots and 930 Cv boots for sale in the classifieds.
Syncro transmission upgrade parts in the Classifieds.
Subaru EJ22+UN1 5 speed transmission
http://www.thesamba.com/vw/forum/viewtopic.php?t=416343
Syncro http://www.thesamba.com/vw/forum/viewtopic.php?t=4...num+gadget

[Hammy1]

Digi-key probably sells those (and the pins).

Jon h.

[ALIKA T3]

[mrjoshida]

Thanks for the offer. I was able modify a PC molex connector enough to get a solid fit (reinforced with some electrical tape), so I'm going to leave well enough alone for now.