| Author |
Message |
Astrohippie
Samba Member
Joined: February 19, 2020
Posts: 1
Location: Huntsville, Alabama
|
 Posted: Tue Jul 02, 2024 5:24 am Post subject: Need reputable engine supplier for Bay Window bus |
 |
|
I am in northern Alabama and am looking for a reputable engine rebuilder or to buy a reliable crate engine for our 73 bay window. We have not had good luck with the common suppliers found on the internet. We are on our 3rd engine in 9 years.
Can anyone recommend a rebuilder or a reputable supplier or for a 2000cc Type 4 long block? It seems like there are fewer suppliers than there used to be and many of those that remain are not really supplying quality motors. Or if theya re, they have a 12 month lead time.
Any help is appreciated.
Last edited by Astrohippie on Tue Jul 02, 2024 8:13 am; edited 1 time in total |
|
| Back to top |
|
 |
PatJr
Samba Member
Joined: August 09, 2010
Posts: 254
Location: earth
|
| Posted: Tue Jul 02, 2024 5:28 am Post subject: Re: Need reputable engine supplier for Bay Window bus |
|
|
type 4?
EMPI sells type 1 crate engines
https://empius.com/empi-long-block-engines/
_________________
#############################################
1970 Transporter a orange one
############################################# |
|
| Back to top |
|
|
skills@eurocarsplus
Samba Peckerhead
Joined: January 01, 2007
Posts: 17908
Location: sticksville, ct.
|
| Posted: Tue Jul 02, 2024 9:01 am Post subject: Re: Need reputable engine supplier for Bay Window bus |
|
|
if you actually want to use the bus, bite the bullet and go with a Subaru swap
yea, it gets expensive but how much time have you wasted on the T4?
I just did a T4 install (against my better judgement) and it was a 'well known' builder.... the fucker leaked oil the minute it started from multiple places
the cost is staggering for a proper T4 build today.
I'm not saying it can't be done, but the juice isn't worth the squeeze it seems
_________________
| gprudenciop wrote: |
my reason for switching to subaru is my german car was turning chinese so i said fuck it and went japanese....... |
| Jake Raby wrote: |
| Thanks for the correction. I used to be a nice guy, then I ruined it by exposing myself to the public. |
| Brian wrote: |
| Also the fact that people are agreeing with Skills, it's a turn of events for samba history |
|
|
| Back to top |
|
|
danfromsyr
Samba Member
Joined: March 01, 2004
Posts: 15406
Location: Syracuse, NY
|
| Posted: Tue Jul 02, 2024 12:34 pm Post subject: Re: Need reputable engine supplier for Bay Window bus |
|
|
https://www.mofoco.com/category/Type_4_Longblocks/c163
MoFoCo Enterprises Inc. 4170 N Lydell Ave Milwaukee, WI 53212 Phone: 414‑963‑1020
Store & Phone Hours: Monday‑Friday 9:00AM - 3:00PM Saturday CLOSED Sunday CLOSED
_________________
| Abscate wrote: |
| These are the reasons we have words like “wanker” |
|
|
| Back to top |
|
|
tommu 
Samba Member
Joined: November 15, 2011
Posts: 665
Location: L.A.
|
| Posted: Tue Jul 02, 2024 2:57 pm Post subject: Re: Need reputable engine supplier for Bay Window bus |
|
|
| skills@eurocarsplus wrote: |
if you actually want to use the bus, bite the bullet and go with a Subaru swap
yea, it gets expensive but how much time have you wasted on the T4?
I just did a T4 install (against my better judgement) and it was a 'well known' builder.... the fucker leaked oil the minute it started from multiple places
the cost is staggering for a proper T4 build today.
I'm not saying it can't be done, but the juice isn't worth the squeeze it seems |
If only we knew someone who could help with that. 
_________________
  |
|
| Back to top |
|
|
my59
Samba Member
Joined: August 13, 2003
Posts: 3999
Location: connecting the dots
|
| Posted: Tue Jul 02, 2024 3:28 pm Post subject: Re: Need reputable engine supplier for Bay Window bus |
|
|
When I redid the bus engine, the parts and machine shop alone were about 3500, time spent part shopping, or time spent taking apart, cleaning, measuring, checking measurements, and putting it all back together.
_________________
my59: Well son, my grandfather died before I got to drive it, so does that answer your question?
our79: sunroof bus w/camper interior and 2.0 FI
Other:'12 Jetta, '77 Benz 300D, and a 74 MG Midget. |
|
| Back to top |
|
|
skills@eurocarsplus
Samba Peckerhead
Joined: January 01, 2007
Posts: 17908
Location: sticksville, ct.
|
| Posted: Tue Jul 02, 2024 4:55 pm Post subject: Re: Need reputable engine supplier for Bay Window bus |
|
|
| tommu wrote: |
If only we knew someone who could help with that. |
if only 
No joke, ask RKW and busdaddy what I want thru with a T4. It is the last one I'll ever touch in that capacity again.
The expectations just can't live up to the labor anymore. I'll be the first to admit it's sad... really sad
_________________
| gprudenciop wrote: |
my reason for switching to subaru is my german car was turning chinese so i said fuck it and went japanese....... |
| Jake Raby wrote: |
| Thanks for the correction. I used to be a nice guy, then I ruined it by exposing myself to the public. |
| Brian wrote: |
| Also the fact that people are agreeing with Skills, it's a turn of events for samba history |
|
|
| Back to top |
|
|
dodger tom
Samba Member
Joined: March 25, 2013
Posts: 2046
Location: Central Coast, CA, but we're all still Ukrainian and Californian
|
| Posted: Tue Jul 02, 2024 7:15 pm Post subject: Re: Need reputable engine supplier for Bay Window bus |
|
|
try tuttle in costs mesa. not close, but a quality engine.
_________________
1978 Champaign Edition 2 Westfalia
Would never find the time to keep up another classic air-cooled. |
|
| Back to top |
|
|
W1K1
Samba Member
Joined: March 04, 2004
Posts: 5320
Location: Southern AB
|
| Posted: Wed Jul 03, 2024 2:03 pm Post subject: Re: Need reputable engine supplier for Bay Window bus |
|
|
I'm with Skills on this one
I did the EJ2.5 subi swap on my 71 westy, 165hp stock is a pleasure to drive.
_________________
1973 super 2110cc
1965 squareback 1500E-sold
1971 bay window westy- EJ2.5 subi swap |
|
| Back to top |
|
|
vwmaniaman
Samba Member
Joined: June 07, 2005
Posts: 607
Location: Grand Rivers,KY
|
| Posted: Thu Jul 04, 2024 6:03 am Post subject: Re: Need reputable engine supplier for Bay Window bus |
|
|
My Dad did a engine swap with a Transvair kit on a 68 T2 passenger van. That was a sweet ride with the 69 105hp six in it. Had the automatic transmission in it too. What a pleasure to drive it. Hills? No problem.
_________________
Working on a VW is like fun with a friend!
65 Beetle
75 Westy "Pumpkin Van"
86 Westy "Brown Betty"
87 Cabrio |
|
| Back to top |
|
|
|
