| Author |
Message |
teufeltito
Samba Member
Joined: August 11, 2007
Posts: 399
Location: athens, ga
|
 Posted: Fri May 02, 2008 2:24 am Post subject: going to check out a bug with a 2275 stroker |
 |
|
it has dual weber 44 idfs. flame thrower coil, distributer and wires. an oil cooler with and electric fan.
what are your experiences with them? pluses and minuses.
_________________
1966/1959 standard: 1300cc , 6inch slammed DD
1973 standard: 1600cc, og stocker
1966 standard: incomplete volksrod w/ 2187cc
1972 transporter: incomplete slightly lowered
“A car is never too low, it’s the ground that is too high.” |
|
| Back to top |
|
 |
vdubyah73
Samba Member
Joined: July 05, 2003
Posts: 2541
Location: somewhere in Texas, my house has wheels
|
| Posted: Fri May 02, 2008 4:54 am Post subject: |
|
|
Depends on who built it, the parts used, etc... Take it for a ride and see how it handles mid throttle driving. Pay attention to what it does with light pedal movements in traffic type driving. If the car drives smooth under these conditions then you can figure the owner either knew what he was doing or the person that does his work knew what they were doing. This is not an end all, be all solution. If you have the skills and tools check the compression.
Bill
_________________
burning down the house
73 bounty hunter, sold.
'77 transporter, junked had crotch rot.
Dubless, but have a CPR built stroker waiting for a new to me Beetle
'93 Fleetwood Bounder 34' |
|
| Back to top |
|
|
|
