| Author |
Message |
fclmscott
Samba Member
Joined: February 22, 2003
Posts: 171
|
 Posted: Sun Nov 02, 2008 9:25 pm Post subject: Cam mod after Carb & Dizzy ordered |
 |
|
Hey guys
Need your input here. I have ordered a set of kads and a vac/mec curved dizzy from AJ Simms and have since torn down the case and found I need to replace the cam in this engine. It's a stock 1641 with the exception of the carbs and dizzy that was ordered from AJ. Do you think that adding a W100 to the mix will cause me a problem with the curve and jetting that AJ is sending out? He will be running this header muffler as well.
http://www2.cip1.com/ProductDetails.asp?ProductCode=ACC%2D35067
Also what are your thoughts on using new lifters with the old cam?
Thanks
FS |
|
| Back to top |
|
 |
krusher
Samba Member
Joined: September 24, 2002
Posts: 7661
Location: europe
|
| Posted: Mon Nov 03, 2008 12:55 am Post subject: |
|
|
Just get back To AJ, he has cams and will be able to tell you exactly what will work with your carbs/distributor.
_________________
(06:31:07) RoachGhia: "i drink dick way too fast" |
|
| Back to top |
|
|
|
