Rear trailing arm diagrams?

[Steenkbug]

Is there anywhere that has an exploded view of the rear trailing arms and their assembly? (This is a later model IRS TA) I know that CIP1 has a beautiful front end exploded diagram. (Just not rear)
And the Rob and whatshisname tech support pages have been read and reread, but I still dont quite get it...

I have mine completely disassembled and this is when those pictures would have come in handy. (Take note fellow noobs)

Thus far I have the inner and outter bearings pushed in, and the little circlip that retains the inner bearing installed. Im pretty sure that there are required spacers (and an oil slinger of sorts under the outter grease seal) ?

And, is is supposed to be rather difficult to get the axle stub through the inner bearing? (Press it in?) and the outter bearing collar?
Thanks in advance!
-Me
_________________
Procrastination is like masturbation...
It feels good at the time, but in the end you are only fu*king yourself...

[69 Jim]

Click on diagram #40:

http://www.oldbeetle.com/pcat/epc.html

[Steenkbug]

YESSSSSSSS!!!!

YOU SO RULE BUD!

I cant thank you enough for giving me one less excuse to actually get some progress on my car!

*Pound of the Knucks*
Thanks again
-Me
_________________
Procrastination is like masturbation...
It feels good at the time, but in the end you are only fu*king yourself...

[69 Jim]

[westcoast-paul]

[69 Jim]