Latest Rage Master Cylinder

Need4Speed77 · Posted: Thu Feb 03, 2011 9:08 pm Post subject: Latest Rage Master Cylinder

I just bought a pair of Latest Rage master cylinders because my old ones were shot. I thought that I would be able to screw the fittings right in but the ports are not 1/8" npt. I cannot figure out what they are. I tried all the fittings I have and none seemed to fit right. It looks like there is a 45* flare at the bottom of the threads but not sure about the threads.

Does anyone that has them know what size/type fitting goes into these master cylinders?

Need4Speed77 · Posted: Thu Feb 03, 2011 9:55 pm Post subject:

Found out what they are so if anyone else has the same question they can search it. They are 3/8x24 threaded master cylinders. Though Latest Rage is in the proces of changing their mc's to 1/8" npt.

BugMan114 · Posted: Fri Feb 04, 2011 9:25 am Post subject:

is it inverted flare?
_________________
1974 Super Beetle: Custom resto in progress
1972 Super Beetle: Daily Driver
1971 Std. Beetle w/ 1929 Mercedes Benz Gazelle kit
1960 Baja Bug
1969 Baja Bug
Sand Rail- Homemade
Sand Rail- FUBAR

Aircooled Airheads

Why the hell do they call it a gland nut. its obviously a big fat bolt!!!

Need4Speed77 · Posted: Sat Feb 05, 2011 12:00 am Post subject:

No it is bubble flare.


Hello! Log in or Register \| Help \| Donate \| Buy Shirts	See all banner ads \| Advertise on TheSamba.com

	Forum Index -> HBB Off-Road	All times are Mountain Standard Time/Pacific Daylight Savings Time
Page 1 of 1