| Author |
Message |
The_whingnut
Samba Member
Joined: August 10, 2009
Posts: 485
Location: Norfolk Va
|
 Posted: Sun Sep 18, 2011 8:14 pm Post subject: 002 301 103A into a 78 bus can it be done? |
 |
|
well i'm in a pickle. i'm moving and putting my bus together and found i have a 002 trans not a 091.
can you fit a 002 301 103a trans with the bell housing hangers into a 78 bus with a 2.0.
i know the trans does fit on the engine, will the input shaft fit into the 2.0L?
what about the starter will it fit my fly wheel?
the worse part is i have until the 23rd to have this done.
I'm looking for a 091 but my lead time on the parts is very short. I'll take whatever help i can get.
_________________
The Whingnut
65 Type 1 "Ursel"
78' T2 bay "Blue Bunny Express"
PVWC Hampton Roads VA
CVA South East CT |
|
| Back to top |
|
 |
VDubTech
Samba Member
Joined: December 29, 2002
Posts: 9155
Location: Syracuse, NY
|
| Posted: Sun Sep 18, 2011 8:34 pm Post subject: |
|
|
I've got an 091 I would be happy to sell you and ship to you.
_________________
First Trip in the RustyBus:
http://www.thesamba.com/vw/forum/viewtopic.php?t=279077&highlight=
| borninabus wrote: |
| a measurement of your rod would be extremely useful. |
| notchboy wrote: |
| my dad wasnt a belittling cock when he tought me how to wrench on cars. |
| EverettB wrote: |
One photo = good for reference.
10 photos = douchebaggery |
|
|
| Back to top |
|
|
The_whingnut
Samba Member
Joined: August 10, 2009
Posts: 485
Location: Norfolk Va
|
|
| Back to top |
|
|
LeeE
Samba Member
Joined: May 25, 2004
Posts: 395
Location: Orlando
|
| Posted: Mon Sep 19, 2011 5:50 am Post subject: |
|
|
My '78 had an 002 in it when I bought it; I didn't realize it until I first pulled the engine (2 liter). I bought the correct 091 trans and replaced it; it was a simple straight-out swap for me, didn't have to change anything else.
_________________
1978 Westfalia stock 2.0 FI
Welcome to the Okeedokee Swamp |
|
| Back to top |
|
|
The_whingnut
Samba Member
Joined: August 10, 2009
Posts: 485
Location: Norfolk Va
|
| Posted: Mon Sep 19, 2011 11:50 am Post subject: |
|
|
so far the info i have been getting is saying you can use the 002 trans but you have to have the 215mm flywheel to do so, my trans slid right up to the engine with no cuts on the bell housing so i may be ok to use it i st need a starter. the trans is the same size as the 091 for mounts, so we will try it out tonight. worse case i'll buy a 091.
_________________
The Whingnut
65 Type 1 "Ursel"
78' T2 bay "Blue Bunny Express"
PVWC Hampton Roads VA
CVA South East CT |
|
| Back to top |
|
|
busman78
Samba Member
Joined: August 17, 2004
Posts: 4656
Location: Oklahoma City, OK
|
| Posted: Mon Sep 19, 2011 5:27 pm Post subject: |
|
|
| The 210 or 215 (non 914 215) flywheels will work. If the 002 has the early bay nose hangers they will need to be swapped for the late bay nose hangers. Input shaft will not be an issue. You will need to use a 002 type starter. |
|
| Back to top |
|
|
The_whingnut
Samba Member
Joined: August 10, 2009
Posts: 485
Location: Norfolk Va
|
| Posted: Tue Sep 20, 2011 4:46 am Post subject: |
|
|
I've got all the parts just need to put it in. I was really surprised to find a starter@ advance auto. They had one on the shelf I also have a good used one so im good on parts just low on time.
_________________
The Whingnut
65 Type 1 "Ursel"
78' T2 bay "Blue Bunny Express"
PVWC Hampton Roads VA
CVA South East CT |
|
| Back to top |
|
|
|
