garagebandking41
Samba Member
Joined: June 15, 2011
Posts: 302
Location: Gulf Coast Florida
|
 Posted: Wed May 30, 2012 6:13 pm Post subject: Intake Manifold Lettering and Whats that knobby? |
 |
|
I took my manifold off to clean the heat risers, only to find a hole, and another hole in between the heat risers and intake manifold that is nigh impossible to fix...
Since the hear risers are pretty blocked, I gots holes, I figures I might as well find a new one/better one.
The part number is 113 129 701 A.A19
Those last four digits are whats confusing me. What does A.A19 signify, I found an A.A.20 on the classifieds here
http://www.thesamba.com/vw/classifieds/detail.php?id=1150175
But it has some thing attached to the intake, while mine is blocked off...what is that? And what should I be looking for?
It's a H block engine, with I think 34mm Heads. |
|
KTPhil 
Samba Member
Joined: April 06, 2006
Posts: 36025
Location: Conejo Valley, CA
|
| Posted: Wed May 30, 2012 9:35 pm Post subject: |
|
|
| Attached gizmo is a retrofit EGR valve, best removed and hole plugged (weld it up, don't plug it with a bolt or you will impede the heat riser flow). |
|
