Teflon Tape (for gas)

[Tcash]

Fine Print.
Federal Process Corp gasoila.com.
High density PTFE,
Yellow Thred Tape for Gas.
For use on thread joints on metal pipe (not exceeding 1.5" pipe size), in assemblies handling gasoline, petroleum oils, natural gas(press. not over 300psig), butane & propane.
A minimum of two full wraps is required.

This stuff is a little runny. But is for E85 applications.
http://www.gasoila.com/products/pipe-thread-sealants/gasoila-e-seal-thread-sealant.html

[Danwvw]

Wish I had used that on my Oil lines, I went with some kind of pipe sealer from Napa Auto Parts. Supposed to set up in the presence of metal. Never set up on my Engine Case! Leaks a little Oil there now!
_________________
1960 Beetle And 1679cc DP W-100 & Dual Zeniths!

[AB westy nut]

I used that stuff on my propane tank and stove fittings. You don't need much as it's thicker than regular Teflon tape.
_________________
1963 Ruby Red 356 Cabriolet
1976 Sage Green Westfalia Deluxe