| Author |
Message |
laid720 Samba Member
Joined: January 17, 2013 Posts: 6 Location: JACKSON,MS
|
Posted: Thu Jul 10, 2014 2:11 pm Post subject: air ride |
|
|
for the guys who have air ride on their beetle. what air compressors are you running? how about some pics of the install? where did you mount the air tank and compressors, valves and if you mounted air gauges and switches?
thanks |
|
| Back to top |
|
 |
hoghead5150 Samba Member

Joined: May 03, 2007 Posts: 989 Location: oklahoma
|
Posted: Thu Jul 10, 2014 4:20 pm Post subject: |
|
|
i don't have the car anymore but i ran a viair tank and compressor combo mounted in the spare tire well of my 69.
model i used
http://www.viaircorp.com/ask150highflow.html
fit well, i used pushloc fittings and a manual switch and gauge i got from firestone.
model i used but i got mine off ebay alot cheaper
http://www.suspensionconnection.com/2225.html
i mounted my switch and gauge under the dash at first. after that i took the switch and gauge out of the bracked and mounted them in the speaker grill on the dash. _________________ "i got a friend that knows a guy who's best friend has an uncle that used to have a bug just like yours!"
i measured once, cut it three times, and the damn thing is STILL to short! |
|
| Back to top |
|
 |
mkriglet Samba Member
Joined: September 20, 2011 Posts: 294 Location: wv
|
Posted: Thu Jul 10, 2014 6:27 pm Post subject: |
|
|
Here is my guage panel. |
|
| Back to top |
|
 |
mkriglet Samba Member
Joined: September 20, 2011 Posts: 294 Location: wv
|
Posted: Thu Jul 10, 2014 6:36 pm Post subject: |
|
|
Mounted the pump on the pan in front of the passenger under the gas tank. I ran the lines in under the footrest where the pressure switch and relay are mounted. |
|
| Back to top |
|
 |
mkriglet Samba Member
Joined: September 20, 2011 Posts: 294 Location: wv
|
Posted: Thu Jul 10, 2014 6:39 pm Post subject: |
|
|
here is a pic before the body went on. The tank is under the back seat opposite the battery. |
|
| Back to top |
|
 |
laid720 Samba Member
Joined: January 17, 2013 Posts: 6 Location: JACKSON,MS
|
Posted: Fri Jul 11, 2014 11:24 am Post subject: |
|
|
THANKS GUYS!
mkriglet i looked at your build but didnt see what size wheels you are running?
i was looking at running a set of 17" wheels with the airride. does anyone see why i would have a problem with this or should i stick with some 15" wheels.
i am a newby with vw bugs so sorry for so many questions |
|
| Back to top |
|
 |
mkriglet Samba Member
Joined: September 20, 2011 Posts: 294 Location: wv
|
Posted: Fri Jul 11, 2014 6:16 pm Post subject: |
|
|
| I'm running 17" wheels. Just put them on. Ihave a 4" narrowed beam with 2.5" dropped spindles.without the narrowed beam they would not fit. |
|
| Back to top |
|
 |
lowdown55 Samba Member
Joined: July 27, 2011 Posts: 117
|
Posted: Fri Jul 11, 2014 10:27 pm Post subject: air ride |
|
|
| what air ride set up are you going with,beam and rear?.. |
|
| Back to top |
|
 |
lowdown55 Samba Member
Joined: July 27, 2011 Posts: 117
|
Posted: Fri Jul 11, 2014 10:34 pm Post subject: air ride |
|
|
| what air ride set up are you going with,beam and rear?.. |
|
| Back to top |
|
 |
jaconty Samba Member
Joined: June 19, 2014 Posts: 10 Location: Poland
|
Posted: Mon Jul 14, 2014 3:00 pm Post subject: |
|
|
this is my control system. made yourself
|
|
| Back to top |
|
 |
laid720 Samba Member
Joined: January 17, 2013 Posts: 6 Location: JACKSON,MS
|
Posted: Fri Jul 18, 2014 8:53 am Post subject: |
|
|
| I have a punch drunk front bagged beam narrowed 4" with dropped spindles and bagged rear custom setup. |
|
| Back to top |
|
 |
laid720 Samba Member
Joined: January 17, 2013 Posts: 6 Location: JACKSON,MS
|
Posted: Fri Jul 18, 2014 8:57 am Post subject: |
|
|
| mkriglet what size tires are you running? |
|
| Back to top |
|
 |
lowdown55 Samba Member
Joined: July 27, 2011 Posts: 117
|
Posted: Fri Jul 18, 2014 9:48 am Post subject: air ride |
|
|
| i have a 6" narrow punch drunk bag beam FS... |
|
| Back to top |
|
 |
lowdown55 Samba Member
Joined: July 27, 2011 Posts: 117
|
Posted: Fri Jul 18, 2014 10:03 am Post subject: air ride |
|
|
| i have a 6" narrow punch drunk bag beam FS... |
|
| Back to top |
|
 |
lowdown55 Samba Member
Joined: July 27, 2011 Posts: 117
|
Posted: Fri Jul 18, 2014 10:03 am Post subject: |
|
|
...
Last edited by lowdown55 on Sun Jul 20, 2014 12:11 am; edited 1 time in total |
|
| Back to top |
|
 |
mkriglet Samba Member
Joined: September 20, 2011 Posts: 294 Location: wv
|
Posted: Sat Jul 19, 2014 8:04 pm Post subject: |
|
|
205-40-17 front, 215-45-17 rear. Rims are 17x7" |
|
| Back to top |
|
 |
|