auslander
Samba Member
Joined: January 07, 2003
Posts: 1837
Location: Heart Of Dixie
|
 Posted: Tue Jan 13, 2004 9:30 am Post subject: |
 |
|
This job is not for the faint at heart, you will need to cut the front apron off and quarter panels, you will need to fab a support bracket for the front of the fiberglass kit, you will need to fab a hold down system for the rear. Having the correct tools for cutting is a must to get nice clean lines when your hacking your bug, a good welder, metal tubing. Do you have a local vw club in your area, they might be able to help you through the process. Do a search on the forums for this subject
_________________
Zombie
Wandering...Have you found what your looking for?
66 POS Bus
69 Class 11 Beetle
71 Cat-Look Beetle
64 Old Skool Baja
74 "Swamp" Thing
!!! F**k Cancer !!!
Time's Tide will Smother You
"You can't throw a rock in Long Beach without hitting a tweaker" Steve Tucci |
|
