Front Transmission Mount Question .. 68 Squareback

BluzBug

Are these just locating pins for the front transmission mount? These don't appear to be snapped off. I've watched the YouTube Videos and everyone seems to have 4 Nuts on the Rear.

Image may have been reduced in size. Click image to view fullscreen.

Mike Fisher · Posted: Sun Mar 08, 2015 7:52 am Post subject:

I have a mount here that has about 38mm long studs sticking out of the forged front section. The studs are threaded a little more than 1/2 of the 38mm for washers & nuts. Your forged front section is pretty corroded looking, but should clean up good when you get it out of the car?
_________________
https://imgur.com/user/FisherSquareback/posts
69 FI/AT square Daily Driver
66 sunroof,67,70,71,71,71AT,72,72AT,73 Parts
two 57 oval ragtops sold
'68 Karmann Ghia sold

Society is like stew. If you don't keep it stirred up you end up with a lot of scum on the top! - Russ_Wolfe/Edward Abbey

BluzBug · Posted: Sun Mar 08, 2015 7:56 am Post subject:

So.. once i get the Front Trans Mount out .. remove the Front Forged Section and Sandblast to cleanup? (Sandblaster is nearby) BluzBug

Mike Fisher · Posted: Sun Mar 08, 2015 8:07 am Post subject:

The mount is all one unit, so the front doesn't separate from the mount. I don't see that you have the studs w/threads sticking out, so I hope they aren't broken off in the mount?
_________________
https://imgur.com/user/FisherSquareback/posts
69 FI/AT square Daily Driver
66 sunroof,67,70,71,71,71AT,72,72AT,73 Parts
two 57 oval ragtops sold
'68 Karmann Ghia sold

Society is like stew. If you don't keep it stirred up you end up with a lot of scum on the top! - Russ_Wolfe/Edward Abbey


Hello! Log in or Register \| Help \| Donate \| Buy Shirts	See all banner ads \| Advertise on TheSamba.com

	Forum Index -> Type 3	All times are Mountain Standard Time/Pacific Daylight Savings Time
Page 1 of 1