| Author |
Message |
alinghi12
Samba Member
Joined: April 12, 2013
Posts: 70
Location: United States
|
 Posted: Mon Sep 28, 2015 4:44 pm Post subject: 79 Ignition Control Unit Wiring |
 |
|
Hey All,
Just finished rebuilding my 1979 2.0l CA engine and have hooked it all back up. I am having a problem however with the wiring. The PO had the black wire going to terminal 15 on the coil from the Ignition Control Unit however on the wiring diagram it has it going to the double relay? I can't seem to find the connection it shows. Here's a pic for reference.
I am also trying to figure out where this wire from the double relay 88a is suppost to go, it has a connector on it and is spliced in with another wire.
And just for kicks can't for the life of me figure out where the white wire coming out of the fire wall is suppost to go and can't seem to identify it on the wiring diagram.
[/img] |
|
| Back to top |
|
 |
busdaddy
Samba Member
Joined: February 12, 2004
Posts: 53210
Location: Surrey B.C. Canada, but thinking of Ukraine
|
| Posted: Mon Sep 28, 2015 5:00 pm Post subject: |
|
|
Are you sure that loose spliced in wire isn't 88e?, that's where the black wire should connect according to this:
Click on it to make it big.
As for the other single white wire down low, where does the other end go?, could it be for camping equipment or that dealer A/C?
_________________
Rust NEVER sleeps and stock never goes out of style.
Please don't PM technical questions, ask your problem in public so everyone can play along. If you think it's too stupid post it here
Stop dead photo links! Post your photos to The Samba Gallery!
Слава Україні! |
|
| Back to top |
|
|
alinghi12
Samba Member
Joined: April 12, 2013
Posts: 70
Location: United States
|
| Posted: Mon Sep 28, 2015 5:09 pm Post subject: |
|
|
had to use the flash but it looks like you are correct. looks like 88e is the middle prong. |
|
| Back to top |
|
|
|
