measurements for middle seat mounting

[chase850]

Could someone take a measurement from the bulkhead (behind the front seats) to the first floor mounting hole for the middle seat?

I'm building a topless safari wagon out of a '74 bus. it has a plywood floor and I want to get the seat spacing just right. thanks much, Greg t.

[Vangabonders]

Whats a safari wagon?
_________________
73 tintop to poptop westfalia (Frankenbus)

[chase850]

It's a topless Electric Volkswagen bus to be used for transporting friends through the woods to view wildlife. Kind of a poor man's version of Disney worlds Animal Kingdom Safari

[Sage79]

On my 77 station wagon I measure 21-3/4" from bulkhead to center of first hole/slot for "T"-bolt which holds the clamp, 2nd on 9" center to center back to the second one. I imagine there's a little fore/aft adjustment due to the clamping action on the tubular sled legs. (I don't have a middle seat installed). Hope that helps.
_________________
Dirk
'79 Westy 2.0FI
'77 delux 2.0FI 090Auto - now my son's

[chase850]

Thanks much, Dirk, that's just what I needed.