Scat C25 cam

[johnanddes]

So precisely I posted that I am going with a 1679. Today, I decided to go a different direction. I called the short block builder and decided on a scat c25 cam with stock crank, 1600 Mahler pistons and rebuilt sp stock heads. The question is this:

Can I run a scat C25 cam with all other components (to include 30 pict-3 and screamer 019 electronic points dist) and have a good motor? I have a set of rocker shafts with swivel balls in the rocker arms that I was going to run. I should mention that the case is a AS41 Brazilian case, crank, rods. Thanks for the feedback.




(Edited to mention the Brazilian stuff)
_________________
John

1969 documented numbers matching bug
1968 F250


Keepin the ISS from colliding with space junk

[LeninCas]

I'd use a SVDA but that's just me.
_________________
one, two, many
one too many

[Alstrup]

[gt1953]

Looks like a nice easy set up. If you feel the need to part with the or swap out and even trade me the 019 for one of my SVDA's let me know.
_________________
Volkswagen: We tune what we drive.
Numbers Matching VW's are getting harder to find. Source out the most Stock vehicle and keep that way. You will be glad you did.

72 type 1
72 Squareback
({59 Euro bug, 62, 63, 67, 68, 69, 73 type ones 68 & 69 type two, 68 Ghia all sold})