1969 VW bus internal bumper end mounts for internal dogleg

[rsurfdawg]

Hi Samba Forum-
This is my first post and I'm happy to have found TheSamba. So much useful info.
I need help finding a part. I can't find it any where on internet. I'll replacing the side front fenders on both sides of my 1969 bay bus. I'm replacing the front skin and internal dogleg frame. Since these were totally rusted out I'm in need to the internal bumper end mounts. I was hoping to find these mounts and weld them into the dogleg internal frame part.

Attached is the part I need, circled in red. Other pics are the parts I have for the mount to be welded into.

Any thoughts or suggestions?

Thanks in advance.
Ron

[airschooled]

https://www.klassicfab.com/product-category/bay-window-bus/complete-doglegs-6870-bay-window-bus/
_________________
One-on-one tech help for your vintage Volkswagen:

www.airschooled.com

https://www.patreon.com/airschooled

[SGKent]

probably will have to fab them yourself if that is the only part you are looking for. The different people who make VW bus sheet metal do not show just that part. One alternative is find a donor with good metal in that area and cut out good ones.
_________________
"Most people don't know what they're doing, and a lot of them are really good at it." - George Carlin