restcon
Samba Member
Joined: October 26, 2020
Posts: 37
Location: Columbus Ohio
|
 Posted: Fri Apr 09, 2021 2:30 pm Post subject: Identify Top Boot and Tie Down Fastener |
 |
|
I purchased a 74 Thing that came with a boot for the top. I am trying to identify the boot mfg. and figure out how the inside (the car) boot cover is secured to the top frame/car.
Per the attached picture there are two oblong grommets on the front side flap with two nylon straps, each with a plastic snap connector (female and female). I am assuming that these grommets and snap connectors are used for strapping down the boot flap up and under the top frame or to the body. But, I do not have the nylon strap that connects to the snap connectors - assuming that there is one.
Can anyone shed some light about the boot mfg and how the inside flap is secured?
Thanks. |
|
