what model was this tool set from?

[Chickensoup]

I have a nearly complete hazet tool set and was wondering if it's possible to identify what model and possibly year car it came from?

It's going in my car either way but I was just curious.

Thanks

_________________
-'85 c10 5.3 LS, cam, heads, long tubes, x pipe, 3 inch spin tech's
-'01 e46 325ci *tree modded
-'05 B5.5 TDI Wagon 17in sport rims ;EGR + BSM + ASV Delete, Stage-2 Tune, straight pipe
'65 Tourist Delivery Build
'66 RIP

[Abscate]

A 1974 Bus with a Sooby engine

( sorry)
_________________
🇺🇸 🇺🇸 🇺🇸 🇺🇸 🇺🇸 🇺🇸 🇺🇸 🍊 🍊 🍊

[iowegian]

[Abscate]

Embarrassed red
_________________
🇺🇸 🇺🇸 🇺🇸 🇺🇸 🇺🇸 🇺🇸 🇺🇸 🍊 🍊 🍊

[oprn]

That is not a Bus jack! Other than that all the earlier (pre-'71) tool kits were pretty much the same as I recall. It would be hard to put a year or a model on one.
_________________
Our cars get old, we get old but driving an old VW never gets old!

[raygreenwood]

Yes.....except for small variations....usually in jack type and length.....sometimes in the material making up the tool kit bag.....most of the tool kits across models and years were the same or pretty close.

For example....ust at a glance with that jack type and size.....thats pretty much the identical kit that would come in a 1971 VW 411.....which i doubt is what you are working with ....so you just KNOW that other cars used the same kit. Except that in most 411 the small lever bar in the 411 kit would usually be straight.

Ray

[mark tucker]

hazit a name on it?

[Chickensoup]

[Abscate]

[wheel607]

Nozit!

[mark tucker]

well hear it go's. it's name is rusty jack....

[Chickensoup]

[Abscate]