Hello! Log in or Register   |  Help  |  Donate  |  Buy Shirts See all banner ads | Advertise on TheSamba.com  
TheSamba.com
 
Tiguan torque converter unbolt?
Forum Index -> Water-cooled VW Share: Facebook Twitter
Reply to topic
Print View
Quick sort: Show newest posts on top | Show oldest posts on top View previous topic :: View next topic  
Author Message
Da TOW'D
Samba Member


Joined: December 25, 2005
Posts: 1321
Location: Bella Coma Canada
Da TOW'D is offline 

PostPosted: Mon Jul 10, 2023 8:44 pm    Post subject: Tiguan torque converter unbolt? Reply with quote

hi Gang,
A couple of tourists smashed the oil pan on their 2010 Tiguan 4 motion van into a large rock down a old Forestry road and they called and I drove out to inspect it--The engine will spin but not run.

The engine sounds like a load of rocks in a cement mixer.
I pulled 12 fault codes

I figure one of the lower chains came off - the top cam chain is still on and tight.
I'm in the process of dropping the engine and want to leave the transaxle in place.

From what I've read on the net pulling the axles out of the front wheel bearing will make it hard to move without damaging the front wheel bearings with out having the axles in place.

I have it on my 2 post hoist and want to get it out of the shop asap--just to have the pleasure of seeing what went wrong I'll want the engine on the engine stand.

Separating the engine and transaxle is my question
Waiting for a junkyard engine if possible
thanks
Hank
_________________
'57 type 1 Blackberry
'58 SC Ruf
'62 type 3 Notch
'92 Eurovan Willy DD
and NUTS
Back to top
View user's profile Send private message Send e-mail Gallery Classifieds Feedback
TDCTDI
Samba Advocatus Diaboli


Joined: August 31, 2013
Posts: 12862
Location: North Carolina
TDCTDI is offline 

PostPosted: Tue Jul 11, 2023 10:53 am    Post subject: Re: Tiguan torque converter unbolt? Reply with quote

Torque converter bolts are accessed by removing starter.


Pop the outer CVs off & bolt them back into the hubs.


Getting a junk yard engine for that turd is setting yourself up for failure, they all need chains after 70k, most will drink 1qt oil every 1,000mi after 90k.

Put new chains, guides, & tensioners in replacement engine.


It is absolutely imperative that the engine codes match & year range is close. VW used a different crank trigger ring in several of the engines, get the wrong one & your shit won’t run.
_________________
Everybody born before 1975 has a story, good, bad, or indifferent, about a VW.


GOFUNDYOURSELF, quit asking everyone to do it for you!


An air cooled VW will make you a hoarder.


Do something, anything, to your project every day, and you will eventually complete it.
Back to top
View user's profile Send private message Gallery Classifieds Feedback
Da TOW'D
Samba Member


Joined: December 25, 2005
Posts: 1321
Location: Bella Coma Canada
Da TOW'D is offline 

PostPosted: Tue Jul 11, 2023 11:21 am    Post subject: Re: Tiguan torque converter unbolt? Reply with quote

Thanks for that

good info on the chains

the owners have written it off so it is just a see what went wrong for me project
cheers
Hank
_________________
'57 type 1 Blackberry
'58 SC Ruf
'62 type 3 Notch
'92 Eurovan Willy DD
and NUTS
Back to top
View user's profile Send private message Send e-mail Gallery Classifieds Feedback
Display posts from previous:   
Reply to topic    Forum Index -> Water-cooled VW All times are Mountain Standard Time/Pacific Daylight Savings Time
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum

About | Help! | Advertise | Donate | Premium Membership | Privacy/Terms of Use | Contact Us | Site Map
Copyright © 1996-2023, Everett Barnes. All Rights Reserved.
Not affiliated with or sponsored by Volkswagen of America | Forum powered by phpBB
Links to eBay or other vendor sites may be affiliate links where the site receives compensation.