Author |
Message |
curtw_944 Samba Member
Joined: May 02, 2004 Posts: 84 Location: Thornton, colorado
|
Posted: Wed Feb 14, 2024 3:48 pm Post subject: Porsche Phone dial questions |
|
|
I have a 68 ghia and a set of late phone dial rims, 15/7" 52mm offset. I am going to be installing disks on all for corners. I am not concerned with the fitment on the front as I plan to run a narrowed beam. My concern is the rear. will the rims fit with out body mods? I have seen many ghias with phone dials but I know there are a couple different variety's and off sets that were available. _________________ So Many Hobbies,
So little time!! |
|
Back to top |
|
|
Mike Fisher Samba Member
Joined: January 30, 2006 Posts: 17974 Location: Eugene, OR
|
Posted: Wed Feb 14, 2024 5:03 pm Post subject: Re: Porsche Phone dial questions |
|
|
I don't think they will fit.
Mount some cheap used tires to test fit them.
I have 185x60 & 205x70 on 5.5"x15" 730P www.Mobelwagen.com wheels.
_________________ https://imgur.com/user/FisherSquareback/posts
69 FI/AT square Daily Driver
66 sunroof,67,70,71,71,71AT,72,72AT,73 Parts
two 57 oval ragtops sold
'68 Karmann Ghia sold
Society is like stew. If you don't keep it stirred up you end up with a lot of scum on the top! - Russ_Wolfe/Edward Abbey |
|
Back to top |
|
|
NJ John Samba Member
Joined: September 21, 2007 Posts: 2227 Location: HdG, MD & NJ
|
Posted: Thu Feb 15, 2024 8:16 am Post subject: Re: Porsche Phone dial questions |
|
|
There are 15x6” phone dials. Also, some ghia owners have narrowed rear control arms. Then you could stuff that 15x7 in there. _________________ 1973 standard, yellow, lowered, 3” narrowed front, 1600 blo-thru turbo w/single dell 15.4@86, so far
11.41 et buggy. Long gone
Let’s go O’s! Let’s go O’s!
https://www.youtube.com/@AirSpooledGarage |
|
Back to top |
|
|
|