Author |
Message |
calvinater Samba Member
Joined: September 06, 2014 Posts: 3334 Location: 802 The Pointless Forrest
|
Posted: Sat Apr 06, 2024 4:49 am Post subject: metal buildings |
|
|
Looking to erect a 30x40 building for the boy to use as a shop.
Anyone have experience with erecting your own?
Were you happy with the end result?
Any reccomended manufacturers?
Thanks _________________ "Albatross"! |
|
Back to top |
|
|
Bulli Klinik Samba Member
Joined: January 16, 2005 Posts: 2080 Location: Bulli Klinik, Colorado Springs
|
Posted: Sat Apr 06, 2024 8:03 am Post subject: Re: metal buildings |
|
|
I erected a quonset hut a couple of years ago. I farmed out the finish work on the foundation and friend and I did the rest of the work. I got a really good deal on a used shell and we built the rest.
_________________ I've never met a Bus I didn't like.
Mike K
Bulli Klinik
Colorado Springs |
|
Back to top |
|
|
nsracing Samba Member
Joined: November 16, 2003 Posts: 9490 Location: NOVA
|
Posted: Wed Apr 24, 2024 4:02 am Post subject: Re: metal buildings |
|
|
Nice metal! Maybe double that size and triple will do me just fine in the middle of the desert.
But I am more traditional - i like old firestations and make them like workshop. Plenty properties like that. |
|
Back to top |
|
|
kingkarmann Samba Member
Joined: November 05, 2003 Posts: 4114
|
Posted: Wed Apr 24, 2024 10:03 am Post subject: Re: metal buildings |
|
|
calvinater wrote: |
Looking to erect a 30x40 building for the boy to use as a shop.
Anyone have experience with erecting your own?
Were you happy with the end result?
Any reccomended manufacturers?
Thanks |
Versitube
https://www.versatube.com/building-kits/garages-buildings/
I have been looking in an RV Port.
Not the cheapest but the ones I have looked at are well engineered. _________________ "Depression is a malfunction of the instrument we use to determine reality.”
Mike Gerson
What is your "Bespoke Reality"? |
|
Back to top |
|
|
typ914 Samba Member
Joined: October 19, 2012 Posts: 231 Location: Atlanta, Ga
|
Posted: Wed Apr 24, 2024 12:24 pm Post subject: Re: metal buildings |
|
|
Not me but a friend built a 60 x 100 metal building. He built his house in side the first quarter of it with the front looking like a normal house. The rest of the building was his workshop. A contractor working on a house next to his property saw the set up and loved it. The guy made an offer he couldn't refuse and he sold it to him before he moved in. Doing a building like that is part of my retirement plan! |
|
Back to top |
|
|
Dusty1 Samba Member
Joined: April 16, 2004 Posts: 1435
|
Posted: Fri Apr 26, 2024 6:32 am Post subject: Re: metal buildings |
|
|
Bought a Morton building 30 years ago and would do it again.
New England Caveat:
20' x 50' is about all you want to heat in the winter. If you're using it as a workshop don't go big and don't go tall. You can work in a tin shed in Texas, Arizona or New Mexico. Working in a tin shed in Vermont in January is almost as miserable as wallowing in the snow outside tryin' to start a soggy and hard to light diesel.
My late brother's place sold literally last week with the last gentleman's workshop I built. That one was wood over a structural steel frame, heavily insulated.
You can generally buy a big industrial space cheaper than you can build one.
First thing every woodchuck up north builds is a workshop big enough to accommodate their log truck and their skidder. Economy takes its inevitable downturn and the bank gets it.
.
. |
|
Back to top |
|
|
calvinater Samba Member
Joined: September 06, 2014 Posts: 3334 Location: 802 The Pointless Forrest
|
Posted: Fri Apr 26, 2024 4:23 pm Post subject: Re: metal buildings |
|
|
Went with a Future Buildings 30x 48 fully insulated and delivered, 28k.
Next up site prep.
any tips on radiantt heat tubing? _________________ "Albatross"! |
|
Back to top |
|
|
busdaddy Samba Member
Joined: February 12, 2004 Posts: 51185 Location: Surrey B.C. Canada, but thinking of Ukraine
|
Posted: Fri Apr 26, 2024 4:40 pm Post subject: Re: metal buildings |
|
|
calvinater wrote: |
any tips on radiantt heat tubing? |
Map it out carefully and space it widely if possible, if holes in the floor for hoists and the like are required later it's good to know where you can drill safely. _________________ Rust NEVER sleeps and stock never goes out of style.
Please don't PM technical questions, ask your problem in public so everyone can play along. If you think it's too stupid post it here
Stop dead photo links! Post your photos to The Samba Gallery!
Слава Україні! |
|
Back to top |
|
|
my59 Samba Member
Joined: August 13, 2003 Posts: 3796 Location: connecting the dots
|
Posted: Fri Apr 26, 2024 8:56 pm Post subject: Re: metal buildings |
|
|
busdaddy wrote: |
calvinater wrote: |
any tips on radiantt heat tubing? |
Map it out carefully and space it widely if possible, if holes in the floor for hoists and the like are required later it's good to know where you can drill safely. |
Keep in mind radient floor heating takes time to warm up and cool down. EPS insulation under the slab works well, no need to heat the ground under, but you need to look at the PSI rating of the insulation so it doesn't crush under load of slab (dead load) and what you plan on putting on the slab (live load)
I'd be figuring out equipment being anchored to floor, and maybe thicken slab in the area and pattern the piping accordingly.
Pex tubing was used last time I did a place with radiant heating, and the Hvac engineer suggested a 6" slab to increase heated mass. There was a floor thermostat involved, and glycol? In the boiler water in case of power failure to make sure nothing froze. _________________ my59: Well son, my grandfather died before I got to drive it, so does that answer your question?
our79: sunroof bus w/camper interior and 2.0 FI
Other:'12 Jetta, '77 Benz 300D, and a 74 MG Midget. |
|
Back to top |
|
|
|