Hello! Log in or Register   |  Help  |  Donate  |  Premium Membership  |  Buy Shirts See all banner ads | Advertise on TheSamba.com  
TheSamba.com
 
Dune buggy in Gatesville TX
Forum Index -> Kit Car/Fiberglass Buggy/356 Replica Share: Facebook Twitter
Reply to topic
Print View
Quick sort: Show newest posts on top | Show oldest posts on top View previous topic :: View next topic  
Author Message
slayer61
Samba Member


Joined: June 01, 2021
Posts: 1343
Location: TX
slayer61 is offline 

PostPosted: Sat Nov 22, 2025 1:27 pm    Post subject: Dune buggy in Gatesville TX Reply with quote

Image may have been reduced in size. Click image to view fullscreen.


Your dune buggy was spotted at the toy drive/car show in Gatesville, TX. This morning. My wife was very interested in your roof. Who made it? Are they still in business?

Paul
_________________
Cusser wrote:

... Most folks are idiots when it deals with electrical !!!


67rustavenger wrote:

3/4 race cam? What's missing, one of the lobes? Shocked


Paul

'68 Manx clone... Sears??
RLR/Strange brakes
2276 built on AS21 case
W-125 w/ GB 1.25:1 rockers
Mahle forged pistons
CB 4340 crank
CB H beam rods
deep sump
45 DCOE
Garrett turbo
Tim's stage II turbo heads
MSD Box and distributor
Car Craft turbo header
Back to top
View user's profile Send private message Send e-mail AIM Address Yahoo Messenger MSN Messenger Facebook Twitter Instagram Gallery Classifieds Feedback
rugblaster
Samba Member


Joined: March 31, 2016
Posts: 1242
Location: San Angelo, Texas
rugblaster is offline 

PostPosted: Tue Nov 25, 2025 4:57 pm    Post subject: Re: Dune buggy in Gatesville TX Reply with quote

Looks like a golf cart top......if its not, one would work
_________________
'69 Karmy, '69 Camper, Meyers clone, '65 drag bug, 10.78 @ 128 (sold it) '51 Dodge farm truck,
'09 MB E350 '18 MB E400, '65 Plymouth Valiant convertible and a '19 Ford F250 King Ranch (nicer, but dirty, farm truck)

VWoA factory trained line tech 75 till 90 or so
ASE Master Certification
VWoA Assoc. of Quality Technicians inductee (One of 25 in the five state southwest region)
La Confrerie des Chevaliers du Tastevin (San Angelo Chapter)
TCU ......GO FROGS!!!!!!
Back to top
View user's profile Send private message Gallery Classifieds Feedback
oprn
Samba Member


Joined: November 13, 2016
Posts: 15223
Location: Western Canada
oprn is offline 

PostPosted: Wed Nov 26, 2025 3:03 am    Post subject: Re: Dune buggy in Gatesville TX Reply with quote

I am not a fan of tops on Buggies at all for two reasons. First is that enclosures of any kind spoils the whole purpose of a Buggy for me. The open view, the wind in your hair. Yes I am a fan of the biker style of open road, open air touring! Second is access.

This one kind of solves both. I think I could actually live with one of those.
_________________
Our cars get old, we get old but driving an old VW never gets old!
Back to top
View user's profile Send private message Gallery Classifieds Feedback
stevemariott
Samba Member


Joined: November 09, 2003
Posts: 1122
Location: Portland, OR
stevemariott is offline 

PostPosted: Wed Nov 26, 2025 1:21 pm    Post subject: Re: Dune buggy in Gatesville TX Reply with quote

Looks like a regular fiberglass top with the sides cut off, some nice hinges at the windshield frame, and some liftgate struts with a rollbar mount - nice functional setup.

slayer61 wrote:
Image may have been reduced in size. Click image to view fullscreen.


_________________
1963 Manx copy
1968 Bus
Back to top
View user's profile Send private message Gallery Classifieds Feedback
slayer61
Samba Member


Joined: June 01, 2021
Posts: 1343
Location: TX
slayer61 is offline 

PostPosted: Thu Nov 27, 2025 1:10 pm    Post subject: Re: Dune buggy in Gatesville TX Reply with quote

Right? I'm tallish, and don't bend very well anymore, And, I tend to freckle in the sun. It's the best of both worlds. Easy access AND shade. It would make a great addition to my buggy
Image may have been reduced in size. Click image to view fullscreen.

_________________
Cusser wrote:

... Most folks are idiots when it deals with electrical !!!


67rustavenger wrote:

3/4 race cam? What's missing, one of the lobes? Shocked


Paul

'68 Manx clone... Sears??
RLR/Strange brakes
2276 built on AS21 case
W-125 w/ GB 1.25:1 rockers
Mahle forged pistons
CB 4340 crank
CB H beam rods
deep sump
45 DCOE
Garrett turbo
Tim's stage II turbo heads
MSD Box and distributor
Car Craft turbo header
Back to top
View user's profile Send private message Send e-mail AIM Address Yahoo Messenger MSN Messenger Facebook Twitter Instagram Gallery Classifieds Feedback
jsturtlebuggy
Samba Member


Joined: August 24, 2005
Posts: 4627
Location: Fair Oaks/Orangevale, CA
jsturtlebuggy is offline 

PostPosted: Thu Nov 27, 2025 2:48 pm    Post subject: Re: Dune buggy in Gatesville TX Reply with quote

Image may have been reduced in size. Click image to view fullscreen.

Image may have been reduced in size. Click image to view fullscreen.


This is my Meyers Manx Kick Out with a lifting top I made around 2010.
I copied what Bruce had done with the Manxter and it lifting top.
At that time Meyers Manx made a 3 piece top to be able to ship it in flat box. The side pieces bolted on top part. I did want that so I left them off.
Contact Faron at 109 Dune Buggies in Canyon Lane, Texas 505-688-7640 he may be able to supply you a top.


Image may have been reduced in size. Click image to view fullscreen.

Image may have been reduced in size. Click image to view fullscreen.

Image may have been reduced in size. Click image to view fullscreen.

Image may have been reduced in size. Click image to view fullscreen.

_________________
Joseph
Fair Oaks/Orangevale, CA
Elrod Motorsports
Motion Tire Motorsports
Having fun with Dune Buggies since 1970
Into Volkswagens since 1960
Back to top
View user's profile Send private message Gallery Classifieds Feedback
slayer61
Samba Member


Joined: June 01, 2021
Posts: 1343
Location: TX
slayer61 is offline 

PostPosted: Thu Nov 27, 2025 4:38 pm    Post subject: Re: Dune buggy in Gatesville TX Reply with quote

jsturtlebuggy wrote:
Image may have been reduced in size. Click image to view fullscreen.

Image may have been reduced in size. Click image to view fullscreen.


This is my Meyers Manx Kick Out with a lifting top I made around 2010.
I copied what Bruce had done with the Manxter and it lifting top.
At that time Meyers Manx made a 3 piece top to be able to ship it in flat box. The side pieces bolted on top part. I did want that so I left them off.
Contact Faron at 109 Dune Buggies in Canyon Lane, Texas 505-688-7640 he may be able to supply you a top.


Image may have been reduced in size. Click image to view fullscreen.

Image may have been reduced in size. Click image to view fullscreen.

Image may have been reduced in size. Click image to view fullscreen.

Image may have been reduced in size. Click image to view fullscreen.


Thanks Joseph! Much appreciated Very Happy
_________________
Cusser wrote:

... Most folks are idiots when it deals with electrical !!!


67rustavenger wrote:

3/4 race cam? What's missing, one of the lobes? Shocked


Paul

'68 Manx clone... Sears??
RLR/Strange brakes
2276 built on AS21 case
W-125 w/ GB 1.25:1 rockers
Mahle forged pistons
CB 4340 crank
CB H beam rods
deep sump
45 DCOE
Garrett turbo
Tim's stage II turbo heads
MSD Box and distributor
Car Craft turbo header
Back to top
View user's profile Send private message Send e-mail AIM Address Yahoo Messenger MSN Messenger Facebook Twitter Instagram Gallery Classifieds Feedback
Display posts from previous:   
Reply to topic    Forum Index -> Kit Car/Fiberglass Buggy/356 Replica All times are Mountain Standard Time/Pacific Daylight Savings Time
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum

About | Help! | Advertise | Donate | Premium Membership | Privacy/Terms of Use | Contact Us | Site Map
Copyright © 1996-2025, Everett Barnes. All Rights Reserved.
Not affiliated with or sponsored by Volkswagen of America | Forum powered by phpBB
Links to eBay or other vendor sites may be affiliate links where the site receives compensation.