3D files for power window bezel

[VicVan]

I can not find 3D-printing files for the power window bezels. I've searched the forum, and libraries such as Thingiverse.

Does anyone have a source for these?

Thanks

Picture credit: Sodo
_________________
'90 Little Blue Truck, 2WD auto, FAS GenV 2.0 NA (AVH)

[DanHoug]

don't have a file (tho i do have switches in my parts van) but dang, Sodo's clarity of directions/photos is incredible, once again. i would have just pried the buggers out, snapping that upper tab.
_________________
-dan
60% of what you find on the internet is wrong, including this post.

'87 Westy & '89 Westy both 2.1 4spd

Past projects can be found at--
www.thefixitworkshop.com

[ZsZ]

I saw a model somewhere but maybe it was the single one. I will check it later.

However I also saw new ones cheap with switches on aliexpress - but not sure how imporing works for you nowadays.
_________________
Zoltan
1.9 MTdi 2wd Multivan (ex Caravelle)
Van since 2006, engine since 2008

[ZsZ]

Found the 3D file on cults3D:

https://cults3d.com/en/3d-model/tool/switch-mounting-electric-window-golf-mk2-doble

and this is one of the aliexpress ones:
https://www.aliexpress.com/item/1005002617570969.html
_________________
Zoltan
1.9 MTdi 2wd Multivan (ex Caravelle)
Van since 2006, engine since 2008

[VicVan]

Awesome! Thanks
_________________
'90 Little Blue Truck, 2WD auto, FAS GenV 2.0 NA (AVH)