| Author |
Message |
rtarh2o
Samba Member
Joined: November 06, 2007
Posts: 24
Location: Texas
|
 Posted: Fri Nov 28, 2025 8:06 pm Post subject: Power Steering Rack Banjo Bolt |
 |
|
Attempting to rebuild the steering rack on my 86 Syncro
In the process of disassembly one of the banjo bolts was stripped and pretty much destroyed getting it off
Is there a source for these?
Or another banjo bolt that will work?
I read it is an M16x1.5, is that correct? |
|
| Back to top |
|
 |
khughes
Samba Member
Joined: July 13, 2013
Posts: 916
Location: Phoenix AZ
|
| Posted: Fri Nov 28, 2025 9:12 pm Post subject: Re: Power Steering Rack Banjo Bolt |
|
|
| rtarh2o wrote: |
Attempting to rebuild the steering rack on my 86 Syncro
In the process of disassembly one of the banjo bolts was stripped and pretty much destroyed getting it off
Is there a source for these?
Or another banjo bolt that will work?
I read it is an M16x1.5, is that correct? |
Check Belmetric.com
_________________
'86 Westy FAS GenV Turbo (Marvin) |
|
| Back to top |
|
|
|
