Hello! Log in or Register   |  Help  |  Donate  |  Premium Membership  |  Buy Shirts See all banner ads | Advertise on TheSamba.com  
TheSamba.com
 
isocyanates in primer?
Forum Index -> Body/Paint Share: Facebook Twitter
Reply to topic
Print View
Quick sort: Show newest posts on top | Show oldest posts on top View previous topic :: View next topic  
Author Message
Thingdude
Samba Member


Joined: February 23, 2004
Posts: 8
Location: Jefferson City, MO
Thingdude is offline 

PostPosted: Wed Jun 02, 2004 9:46 pm    Post subject: isocyanates in primer? Reply with quote

I have everything ready to start spraying primer onto my car but I am trying to figure out all the proper health precautions before I start (first time to paint a car). Right now I will just be spraying PPG epoxy primer and then the high build or sanding primer that I have yet to buy. The labels on the epoxy primer and hardner cans just reccomend a NIOSH approved respirator which is what I have already. I also have new pink and yellow cartridges ready to put on it. One post says they are good for 6-8 hours. If I keep it in a ziplock bag is that 6-8 hours of use or do I need new filters everyday that I paint? I just want to make sure that the respirator is adequate to keep me protected for both primers. Also, I will be painting outside and probably also use a fan to help blow away the mist. Is it just the base and clearcoats then that have isocyanates? One post said painting in an open garage would be ok with a respirator and I will be outside but I don't want to push my luck. Let me know what you all think. Also, where can I get the nitrile or butyl gloves? Thanks
Back to top
View user's profile Send private message Classifieds Feedback
E-boyz67
Samba Member


Joined: April 27, 2003
Posts: 656
Location: Hawaii
E-boyz67 is offline 

PostPosted: Thu Jun 03, 2004 1:12 am    Post subject: Reply with quote

If you have a charcoal filter you'll be fine but make sure you got some eye protection as well.
_________________
2-67
1-67vert
Back to top
View user's profile Send private message Send e-mail Gallery Classifieds Feedback
VintageVulture
Samba Member


Joined: May 25, 2003
Posts: 791
Location: Pacific Northwest- USA
VintageVulture is offline 

PostPosted: Sun Jun 06, 2004 12:28 pm    Post subject: respiration Reply with quote

Hey-
Epoxy primers don't really kill people as fast as urethanes... Either way, it's the charcoal filters that age in hours, so keep the respirator bagged up tight- I use a Folgers coffee can, but ony after I throw the crappy coffee away!

You ought to be fine in the driveway with what you have planned, the garage is also just as fine- it's all in the amount of exposure you give yourself. Walk out in between coats, and if you SMELL the paints and primers as you are working with them, you are taking in some amounts of their toxins... Have fun!

Ryan
Back to top
View user's profile Send private message Send e-mail Gallery Classifieds Feedback
Tim rag'59
Samba Member


Joined: January 01, 2004
Posts: 121

Tim rag'59 is offline 

PostPosted: Sun Jun 06, 2004 1:18 pm    Post subject: Reply with quote

to my kowledge ALL paints contain iso's some more than others. that's the chemical you can't see or smell, if I'm not mistaking and voc's are the ones you can. 3m's 7192 is usually a good cheap filter you can buy to get the job done it's only about 18 bucks and it lasts for 40 hours(total spray time) with your filter set up you should be fine just don't leave it out and yes use it ALL the time,just some useless info for ya,Tim
Back to top
View user's profile Send private message Gallery Classifieds Feedback
daslowguy710
Samba Member


Joined: May 22, 2004
Posts: 12
Location: san jose
daslowguy710 is offline 

PostPosted: Mon Sep 13, 2004 10:03 pm    Post subject: resperators Reply with quote

i know my posting is way after the fact but if it helps someone else then so be it

the disposible resporators (charcoal type)don't remove the isocynates from the air you are breathing in they will remove some of the volital organic compounds (voc's) that's why with urathane paints & primers you need to use a fresh air supply mask
also one thing to remember is you absorb more in through the pores in your skin and your finger nails
Back to top
View user's profile Send private message Classifieds Feedback
Bklyn63
Samba Mafioso


Joined: August 24, 2002
Posts: 966
Location: "What am I, a mirage?"
Bklyn63 is offline 

PostPosted: Tue Sep 14, 2004 4:59 pm    Post subject: Reply with quote

do youself a favor and dont take any chances with charcoal filters. get a hobby air respirator forced air system they are $150 and well worht the money.
Back to top
View user's profile Send private message Gallery Classifieds Feedback
TimGud
Samba Member


Joined: March 03, 2002
Posts: 6459
Location: Rio Rico Arizona
TimGud is offline 

PostPosted: Wed Sep 15, 2004 6:24 am    Post subject: Reply with quote

Bklyn63 wrote:
do youself a favor and dont take any chances with charcoal filters. get a hobby air respirator forced air system they are $150 and well worht the money.


Do you have a link?
Back to top
View user's profile Send private message Send e-mail Gallery Classifieds Feedback
Display posts from previous:   
Reply to topic    Forum Index -> Body/Paint All times are Mountain Standard Time/Pacific Daylight Savings Time
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum

About | Help! | Advertise | Donate | Premium Membership | Privacy/Terms of Use | Contact Us | Site Map
Copyright © 1996-2025, Everett Barnes. All Rights Reserved.
Not affiliated with or sponsored by Volkswagen of America | Forum powered by phpBB
Links to eBay or other vendor sites may be affiliate links where the site receives compensation.