Kadrons installed on a 36 horse motor ??

[restojohnny]

Has anyone used kadron carburetors on a stock 36 horse motor ? And if so pics ad details of what cam , crank etc.... would be perfect to use ... thanks for any and all information
_________________
$$$ HUSTL'N AIN'T EAZEE $$$
** HELL YEAH I'LL SELL IT TO YOU**
O.G. POMONA VULTURE
MAGNESIUM BRM HOARDING BASTARD !!!!
$$ SWAPMEET MAFIA $$
48 split $$$$
53 LHD, LH cargo door standard kombi
54 Pre-A Porsche
55 oval ribbed door non-semiphore
56 semiphore ragtop
63 notchback (work in progress)
67 original Empi GTV beetle convertible !!
67 deluxe walkthru (work in progress)
67 convertible ghia (work in progress)

"STAY OUTTA MY BACKYARD !!! "

[Alstrup]

WAAAAYYY too large. That will only give you trouble. Kads are even on the large side for a stock 1600 hence why so many have to jet them extra rich to make their engine run fair.
_________________
https://www.thesamba.com/vw/forum/viewtopic.php?t=435993

[restojohnny]

Thankyou for the info brotha i was curious because i haven'r seen anyone do it. I am sure it can be done but probably would cost alot more than most would spend using those carburetors. Thanks again
_________________
$$$ HUSTL'N AIN'T EAZEE $$$
** HELL YEAH I'LL SELL IT TO YOU**
O.G. POMONA VULTURE
MAGNESIUM BRM HOARDING BASTARD !!!!
$$ SWAPMEET MAFIA $$
48 split $$$$
53 LHD, LH cargo door standard kombi
54 Pre-A Porsche
55 oval ribbed door non-semiphore
56 semiphore ragtop
63 notchback (work in progress)
67 original Empi GTV beetle convertible !!
67 deluxe walkthru (work in progress)
67 convertible ghia (work in progress)

"STAY OUTTA MY BACKYARD !!! "

[petrol punk]

Ditto on kads being too big. I just installed dual H30PIC's on my bone stock 36hp and even they feel a bit too big, there is no noticeable difference between half throttle and full throttle with them.
_________________
36hp '56 European DeLuxe oval
'70 bug 1835cc

[Alstrup]

I never messed much with the stock stuff. It was always detailing. But if IRC correctly, Riechert stated a 6 hp increase when installing a set of 28 pct´s on a 30/36 hp. along with a slight increase in top speed.
If we look away from the durability issues with the stock 36 hp crank and focus on power increase on a stock(ish) engine a MAG or Shorrock/Speedwell supercharger would be the chioce. Stay away from the stupid Judson. It will only give you grief. If you are not all purist you can also go with an AMR300
_________________
https://www.thesamba.com/vw/forum/viewtopic.php?t=435993

[esde]

I have seen Dell FRD's installed on a 36 and it ran great.
_________________
modok wrote:
Bent cranks are silent but gather no moss. I mean, ah, something like that.