Author |
Message |
ORANGECRUSHer Samba Member

Joined: June 09, 2006 Posts: 3577 Location: West Coast (Michigan's)
|
Posted: Tue Jul 01, 2025 9:07 am Post subject: Re: Extended arms. Steering help |
|
|
Not to mention, the first thing you see when you come to our little corner of the Samba is a Sticky section that takes up an entire screen. Most forums have three to maybe five stickies. We have a whole screen! We gots the meats! _________________ Brian H.
OrangeCrushERBerrien Warrior-2.4L Quad4-2x3 arms-1.5Fox coilovers-094-930CVs
LAZY MARY1970 Baja 2110cc-82mm CB forged crank-AA pistons/cylinders-Grant rings-1.1 vw rockers-CB serpkit-CB chromoly PRs-CB maxiflow filter pump-wix51515 filter-Dual 44IDF-cut/turned front beam-AEM wideband-Auber CHT-Donaldson Dual PowerCore filters-custom AL air boxes |
|
Back to top |
|
 |
Schepp Samba Member

Joined: March 22, 2020 Posts: 569 Location: NorCal
|
Posted: Tue Jul 01, 2025 9:25 am Post subject: Re: Extended arms. Steering help |
|
|
Yea but like half the good links in the FAQ sticky no longer work. It would be awesome if we could update it.
If a guy only spent an hour digging on the internet he'd find what he's looking for.
That dude rage quit for sure.
Oh well, his loss our gain. |
|
Back to top |
|
 |
ORANGECRUSHer Samba Member

Joined: June 09, 2006 Posts: 3577 Location: West Coast (Michigan's)
|
Posted: Tue Jul 01, 2025 11:58 am Post subject: Re: Extended arms. Steering help |
|
|
Schepp wrote: |
Yea but like half the good links in the FAQ sticky no longer work. It would be awesome if we could update it.
If a guy only spent an hour digging on the internet he'd find what he's looking for.
That dude rage quit for sure.
Oh well, his loss our gain. |
I agree and have been thinking it's about time the stickies get condensed.
Maybe that's who we need to be yelling at? Where's that admin??? This is all his fault. hehe _________________ Brian H.
OrangeCrushERBerrien Warrior-2.4L Quad4-2x3 arms-1.5Fox coilovers-094-930CVs
LAZY MARY1970 Baja 2110cc-82mm CB forged crank-AA pistons/cylinders-Grant rings-1.1 vw rockers-CB serpkit-CB chromoly PRs-CB maxiflow filter pump-wix51515 filter-Dual 44IDF-cut/turned front beam-AEM wideband-Auber CHT-Donaldson Dual PowerCore filters-custom AL air boxes |
|
Back to top |
|
 |
ORANGECRUSHer Samba Member

Joined: June 09, 2006 Posts: 3577 Location: West Coast (Michigan's)
|
Posted: Tue Jul 01, 2025 12:00 pm Post subject: Re: Extended arms. Steering help |
|
|
Schepp wrote: |
Yea but like half the good links in the FAQ sticky no longer work. It would be awesome if we could update it.
If a guy only spent an hour digging on the internet he'd find what he's looking for.
That dude rage quit for sure.
Oh well, his loss our gain. |
I agree and have been thinking it's about time the stickies get condensed.
Maybe that's who we need to be yelling at? Where's that admin??? This is all his fault. hehe _________________ Brian H.
OrangeCrushERBerrien Warrior-2.4L Quad4-2x3 arms-1.5Fox coilovers-094-930CVs
LAZY MARY1970 Baja 2110cc-82mm CB forged crank-AA pistons/cylinders-Grant rings-1.1 vw rockers-CB serpkit-CB chromoly PRs-CB maxiflow filter pump-wix51515 filter-Dual 44IDF-cut/turned front beam-AEM wideband-Auber CHT-Donaldson Dual PowerCore filters-custom AL air boxes |
|
Back to top |
|
 |
cbeck Samba Member
Joined: January 14, 2014 Posts: 2574 Location: high ridge, mo
|
Posted: Tue Jul 01, 2025 3:22 pm Post subject: Re: Extended arms. Steering help |
|
|
My bossman has been hiring youngsters lately. Like younger than my kids (I'm a boomer). Guess they aren't kids any more since they are giving me grandkids.
Kid says, get out of the way old man, I got this.
I say, no you don't .
But at least they show up on time every day. _________________ My cut in half and rebuild thread
www.thesamba.com/vw/forum/viewtopic.php?t=647779 |
|
Back to top |
|
 |
516swg Samba Member
Joined: February 28, 2024 Posts: 131 Location: Idaho
|
Posted: Wed Jul 09, 2025 6:23 pm Post subject: Re: Extended arms. Steering help |
|
|
Yeah... so helpful posts. How many are there? You cutie pies... it's not hard to do a search and see how many times you made useless posts. Nope cupcake. It's not Samantha. This one is yellow. Like I said. Man.... I should have titled this post sometime like......??????
What. Useless information that all you forum lurkers do to pollute the internet:
I wanted an answer and this post turned into a debate of stupidity. |
|
Back to top |
|
 |
516swg Samba Member
Joined: February 28, 2024 Posts: 131 Location: Idaho
|
Posted: Wed Jul 09, 2025 6:31 pm Post subject: Re: Extended arms. Steering help |
|
|
Should I start a new post with the same question, and or should I make a clause about stupid irrelevant answers?
I'll be at the Emmett show and shine if anyone wants to get past their keyboard and get a slap.
Again. Cupcakes, and respectful experts. I came here for advice. I asked a question. And derilects asked the same derelict question on every forum.
I would love for a confident individual to post his/her advice to the original question.
And remember clowns.... this is a searchable thread for years to come |
|
Back to top |
|
 |
516swg Samba Member
Joined: February 28, 2024 Posts: 131 Location: Idaho
|
Posted: Wed Jul 09, 2025 6:35 pm Post subject: Re: Extended arms. Steering help |
|
|
Do you clowns understand that the next guy who searches steering advice is going to see this bs post. And it turned into an argument in how to post and search. Do you clowns think you contributed to anything???
Last edited by 516swg on Wed Jul 09, 2025 6:40 pm; edited 1 time in total |
|
Back to top |
|
 |
516swg Samba Member
Joined: February 28, 2024 Posts: 131 Location: Idaho
|
Posted: Wed Jul 09, 2025 6:36 pm Post subject: Re: Extended arms. Steering help |
|
|
You made this forum a less valuable place. Good job. If I care enough. I'll search your user name and show how many times you've been useless |
|
Back to top |
|
 |
516swg Samba Member
Joined: February 28, 2024 Posts: 131 Location: Idaho
|
Posted: Wed Jul 09, 2025 6:43 pm Post subject: Re: Extended arms. Steering help |
|
|
To the earlier posts.... this is what I found.... a bunch of bs that didn't give any answers to the question. Have I made my point???? If I haven't. We've made a really good thread that some one looking for answers will find. We got 2 pages now. Idiots. |
|
Back to top |
|
 |
516swg Samba Member
Joined: February 28, 2024 Posts: 131 Location: Idaho
|
Posted: Wed Jul 09, 2025 6:44 pm Post subject: Re: Extended arms. Steering help |
|
|
Did you try the search button |
|
Back to top |
|
 |
BFB Samba Member

Joined: November 03, 2014 Posts: 2820
|
Posted: Wed Jul 09, 2025 7:02 pm Post subject: Re: Extended arms. Steering help |
|
|
wow you really got your feelings hurt. in all the time ive been on here and all the ppl who've been pissed off at me, ive never seen anyone make so many whiney posts one right after the other, no one.
I think you set a record.
good job little buddy!
you notice how everyone who posted said the same things to you? and yet they are all in the wrong, yeh ok.
I bet your the type that goes to someone to ask advice then tells them they are wrong.
or when you get someone to come over and fix the shit you can't , you tell them that according to the YouTube video you just watch this is how its done..
and this is coming from me, who's contradictory as fuck and will play devils advocate just for the sake of debating a subject. ( which a lot of people really don't like that apparently).
and if you think this thread is something for people to be concerned about being here for as long as the internet is alive, you haven't seen some of the other shit we've posted nor have you read any old threads from about 10 years ago. those guys would've made you cower in the corner like you were the new guy in prison about to become someone's wife. _________________ "how am i supposed to torque the rear wheel nut to 250 ft lbs??? " - clonebug
An interesting thing happens in forums where everyone starts parroting the same thing and "common knowledge" takes over.
Most experts aren't. |
|
Back to top |
|
 |
Schepp Samba Member

Joined: March 22, 2020 Posts: 569 Location: NorCal
|
Posted: Wed Jul 09, 2025 8:30 pm Post subject: Re: Extended arms. Steering help |
|
|
@ 516swg
Did you not read the damn novel I wrote for you? I literally laid it out on a silver platter with links!
I bet you skimmed right over it like all the other posts. If you pulled your head out of your hairy stink hole you would have noticed.
Buy yourself the Buggy book and read it like the rest of us have.
Good luck trying to ever get any information out of us ever again after that.
You sound super fun to be around. The world is surely screwed if you already reproduced.
This is the most informative VW forum on this planet. If you can’t find the information you’re seeking. You should quit now. People have been doing the same mods for literally decades. Books have been written and published on this very subject.
BFB is one of the most knowledgeable people on here. If you took the time to see the pictures of what the guy has done with the VW platform you wouldn’t be bashing him like you are.
You are one sour grape. |
|
Back to top |
|
 |
ORANGECRUSHer Samba Member

Joined: June 09, 2006 Posts: 3577 Location: West Coast (Michigan's)
|
Posted: Thu Jul 10, 2025 8:15 am Post subject: Re: Extended arms. Steering help |
|
|
hey! he's back!
i gots some reading to do...this should be good _________________ Brian H.
OrangeCrushERBerrien Warrior-2.4L Quad4-2x3 arms-1.5Fox coilovers-094-930CVs
LAZY MARY1970 Baja 2110cc-82mm CB forged crank-AA pistons/cylinders-Grant rings-1.1 vw rockers-CB serpkit-CB chromoly PRs-CB maxiflow filter pump-wix51515 filter-Dual 44IDF-cut/turned front beam-AEM wideband-Auber CHT-Donaldson Dual PowerCore filters-custom AL air boxes |
|
Back to top |
|
 |
ORANGECRUSHer Samba Member

Joined: June 09, 2006 Posts: 3577 Location: West Coast (Michigan's)
|
Posted: Thu Jul 10, 2025 8:33 am Post subject: Re: Extended arms. Steering help |
|
|
Ok. Now I'm pissed! He made Schepp talk about hairy stink holes!! That is just too much for me to handle, Where'd this guy say he was going to be? Somewhere in Idaho? Ok. I'm gonna catch a plane and go let this guy slap me for pushing Schepp to say hairy stink hole! Galdamnit! Entitled little shit! hehe
Oh btw, OP, this forum has been around for decades. I don't think your generic title is going to stand out amongst the tens of thousands of posts that probably had at least an ounce of effort put into them. Belittling people based solely on the fact that you didn't get what you demanded only makes you look bad. You're not convincing anyone. We got enough bad attitudes around here, like BFB, and we only put up with his ass because sometimes he has a good point and he actually cares about the forum.
You may leave now. Come back when you learn not to throw sand in the sand box. _________________ Brian H.
OrangeCrushERBerrien Warrior-2.4L Quad4-2x3 arms-1.5Fox coilovers-094-930CVs
LAZY MARY1970 Baja 2110cc-82mm CB forged crank-AA pistons/cylinders-Grant rings-1.1 vw rockers-CB serpkit-CB chromoly PRs-CB maxiflow filter pump-wix51515 filter-Dual 44IDF-cut/turned front beam-AEM wideband-Auber CHT-Donaldson Dual PowerCore filters-custom AL air boxes |
|
Back to top |
|
 |
ORANGECRUSHer Samba Member

Joined: June 09, 2006 Posts: 3577 Location: West Coast (Michigan's)
|
Posted: Thu Jul 10, 2025 8:37 am Post subject: Re: Extended arms. Steering help |
|
|
Time to lock it down wouldn't you say? _________________ Brian H.
OrangeCrushERBerrien Warrior-2.4L Quad4-2x3 arms-1.5Fox coilovers-094-930CVs
LAZY MARY1970 Baja 2110cc-82mm CB forged crank-AA pistons/cylinders-Grant rings-1.1 vw rockers-CB serpkit-CB chromoly PRs-CB maxiflow filter pump-wix51515 filter-Dual 44IDF-cut/turned front beam-AEM wideband-Auber CHT-Donaldson Dual PowerCore filters-custom AL air boxes |
|
Back to top |
|
 |
cbeck Samba Member
Joined: January 14, 2014 Posts: 2574 Location: high ridge, mo
|
Posted: Thu Jul 10, 2025 9:02 am Post subject: Re: Extended arms. Steering help |
|
|
Aw, I think it's cute that he thinks all link pin beams and chassis are the same and one size fits all. _________________ My cut in half and rebuild thread
www.thesamba.com/vw/forum/viewtopic.php?t=647779 |
|
Back to top |
|
 |
BFB Samba Member

Joined: November 03, 2014 Posts: 2820
|
Posted: Thu Jul 10, 2025 6:14 pm Post subject: Re: Extended arms. Steering help |
|
|
ORANGECRUSHer wrote: |
….. We got enough bad attitudes around here, like BFB, and we only put up with his ass because sometimes he has a good point and he actually cares about the forum.
… |
Well, we all have our strengths & weaknesses, my weakness is that i do care about the forum. Yeh thats right, we know what that makes my strong suit HAHAHA! _________________ "how am i supposed to torque the rear wheel nut to 250 ft lbs??? " - clonebug
An interesting thing happens in forums where everyone starts parroting the same thing and "common knowledge" takes over.
Most experts aren't. |
|
Back to top |
|
 |
ORANGECRUSHer Samba Member

Joined: June 09, 2006 Posts: 3577 Location: West Coast (Michigan's)
|
Posted: Fri Jul 11, 2025 8:05 am Post subject: Re: Extended arms. Steering help |
|
|
Yeah, and sometimes I'm a postcount whore. Somebody needs to keep it flowin sometimes. I have no problem commenting on something I know nothing about when I think someone needs a boost. I think things have improved in the last year, it was getting really quiet in here there for awhile. _________________ Brian H.
OrangeCrushERBerrien Warrior-2.4L Quad4-2x3 arms-1.5Fox coilovers-094-930CVs
LAZY MARY1970 Baja 2110cc-82mm CB forged crank-AA pistons/cylinders-Grant rings-1.1 vw rockers-CB serpkit-CB chromoly PRs-CB maxiflow filter pump-wix51515 filter-Dual 44IDF-cut/turned front beam-AEM wideband-Auber CHT-Donaldson Dual PowerCore filters-custom AL air boxes |
|
Back to top |
|
 |
BFB Samba Member

Joined: November 03, 2014 Posts: 2820
|
Posted: Fri Jul 11, 2025 3:16 pm Post subject: Re: Extended arms. Steering help |
|
|
well, there for a while several of us were busting Oprn's balls about his post whoring but in all honesty, after he slowed down / stopped the whole damn place slowed down, I prefer it when he does whore post. even if it is something just being parroted, that it turns out, is better because he kept thing moving. I told him we need him, he's like a good laxative that keeps the forums from getting all blocked up. hehe
so I say go for it , you post whore your heart out _________________ "how am i supposed to torque the rear wheel nut to 250 ft lbs??? " - clonebug
An interesting thing happens in forums where everyone starts parroting the same thing and "common knowledge" takes over.
Most experts aren't. |
|
Back to top |
|
 |
|