N10 811 1 Fillister Head AM 5 X 8 DIN 85 Machine Screw

[klcarrie]

Hi all,

Looking for information on the machine screws that hold the 6v Voltage Regulator onto early (36 and 40hp) generators.

I need 2, and would like to source them in Canada, if possible.

I found 2 vendors internationally delivering screws with the N10 811 1 specification, but these were sourced from later model vehicles, for use in other applications (for use in steering wheels, and ignition switch surrounds, not that it really mattes).

My internet search has not otherwise informed me of what the AM designation is.

I am assuming the Fillister Head screws i am looking for are 5 mm with a 0.8 mm thread.

I do not wish to bugger up my threads on the generator, so I am being extra cautious.

Any discussion/information in support of my search would be appreciated.

Kevin

M5 x 0.8 8mm length

_________________
Pritchin'
--
Currently looking for:

- Bay Bus Pinion Nut Socket

- 64-67 big nut (rear) drums and brake parts, 46mm axle nuts (Big Nuts)

--
'55 Wolfburg Pannel Project
'55 Wolfsburg SC Project
'71 Westy

[earthquake]

I think that is a cheese head screw, McMaster-Carr sells them pretty cheap.

https://www.mcmaster.com/products/round-head-screw...ead+screws

eQ
_________________
74 CLASS 11 LOOK-A-LIKE
69 DUNE BUGGY
79 INTERNATIONAL SCOUT II
05 SCION XB SERIES RELEASE 2[#437]
95 Chevy C3500 dually
98 Ford E150
Link to Kelly J. Nolte 3/20/53 - 11/6/08
https://time-zonelabs.blogspot.com/p/about-kelly.html
DEATH TO CHINGERS!
[From a military recruitment poster in the novel "The Stainless Steel Rat" By Harry Harrison]