ice baller
Samba Member
Joined: July 13, 2002
Posts: 444
Location: 626 El Monte CA
|
 Posted: Thu Nov 21, 2002 12:41 am Post subject: carbs studering, pls help |
 |
|
| i have a 1600, but i barly put a new cam 110, and dual kadrons and my heads where cut,now the problem is that when i step on it all the way(flooring it)it starts to studer,what could this be?i have and electric fuel pump, my fuel filter is a lil dirty,(2weeks old)it feels like is doesnt get gas when its open trotel,my carbs ,and cam are brand new, what could be the problem, pls help, thank u for reading,,, |
|
Erik G
Samba Member
Joined: October 16, 2002
Posts: 13558
Location: Tejas!
|
| Posted: Thu Nov 21, 2002 1:38 pm Post subject: carbs studering, pls help |
|
|
just for starters, the kad's might not be sync'd correctly, or may be improperly jetted. Kad's like about 3.5 psi from the fuel pump if I remember right, maybe your electric fuel pump is the problem. Could be the acclerator pumps are incorrectly adjusted.
Have you checked the lowbugget website to verify the carbs are working correctly? Empi Kadrons are not really ready to go out of the box, they need a little work sometimes (poor manufacturing processes)
check out the tuning section at http://www.lowbugget.com |
|
