Hello! Log in or Register   |  Help  |  Donate  |  Premium Membership  |  Buy Shirts See all banner ads | Advertise on TheSamba.com  
TheSamba.com
 
Gas / Accelerator pedal floor hinge and parts
Page: 1, 2  Next
Forum Index -> Split Bus Share: Facebook Twitter
Reply to topic
Print View
Quick sort: Show newest posts on top | Show oldest posts on top View previous topic :: View next topic  
Author Message
swade41
Samba Member


Joined: April 29, 2007
Posts: 47
Location: buffalo,ny
swade41 is offline 

PostPosted: Wed May 09, 2007 11:55 am    Post subject: Gas / Accelerator pedal floor hinge and parts Reply with quote

I tried the search and came up with nothing so I'll ask.
My pedal came unatached from the floor at the hinge, it's pretty rusty and can't tell what it was suposed to look like. Is there just a pin/bolt that secures the pedal to the part on the floor ?
How can I fix this ?
Back to top
View user's profile Send private message Classifieds Feedback
Campy
Samba Member


Joined: January 10, 2005
Posts: 4933
Location: Chico, CA
Campy is offline 

PostPosted: Wed May 09, 2007 10:29 pm    Post subject: Reply with quote

A pin fits in the hinge. The pin came partly out of the pedal hinge in my 1957 bus, a few times, over the years, and I finally put a little piece of duct tape at each end of the hinge. There is something that holds the pin in the hinge but I forgot what it is.
Back to top
View user's profile Send private message Gallery Classifieds Feedback
Major Woody
Samba Enigma


Joined: December 04, 2002
Posts: 9016
Location: Portland, OR
Major Woody is offline 

PostPosted: Thu May 10, 2007 9:25 am    Post subject: Reply with quote

There is a piece of spring steel that bears on the recessed area in the center of the hinge pin and keeps it from moving laterally.
Back to top
View user's profile Send private message Gallery Classifieds Feedback
hazetguy
Samba Member


Joined: April 06, 2001
Posts: 10804
Location: the past
hazetguy is offline 

PostPosted: Thu May 10, 2007 9:30 am    Post subject: Reply with quote

Image may have been reduced in size. Click image to view fullscreen.


Image may have been reduced in size. Click image to view fullscreen.
Back to top
View user's profile Send private message Gallery Classifieds Feedback
bugboy63
Samba Member


Joined: December 11, 2005
Posts: 523
Location: tennessee
bugboy63 is offline 

PostPosted: Thu May 10, 2007 10:00 am    Post subject: Re: Gas Pedal Hinge Reply with quote

swade41 wrote:
I tried the search and came up with nothing so I'll ask.
My pedal came unatached from the floor at the hinge, it's pretty rusty and can't tell what it was suposed to look like. Is there just a pin/bolt that secures the pedal to the part on the floor ?
How can I fix this ?


depends on how picky you are i guess.
mine rusted off before i got the westy,
p.o. just used a hardware store hinge screwed in Shocked... it didn't last.
i did the same thing but bolted it in.
it does the job just fine.
Image may have been reduced in size. Click image to view fullscreen.
Back to top
View user's profile Send private message Gallery Classifieds Feedback
polo
Samba Member


Joined: May 31, 2006
Posts: 418
Location: Pacific Palisades, CA
polo is offline 

PostPosted: Thu May 10, 2007 11:27 am    Post subject: Reply with quote

I need to replace that little spring piece... how goes that? Pop the pin out, remove pedal, stick the spring in, replace pedal, replace pin?
_________________
Michael P.
1965 Kombi
1989 Jetta GL (R.I.P.)
2004 New Beetle Convertible GLS 1.8T

BumbleBuggy wrote:
Nothing is cooler than driving a car that brings joy to the world simply by idling at a light.
Back to top
View user's profile Send private message Visit poster's website Gallery Classifieds Feedback
swade41
Samba Member


Joined: April 29, 2007
Posts: 47
Location: buffalo,ny
swade41 is offline 

PostPosted: Thu May 10, 2007 8:11 pm    Post subject: Reply with quote

Thanks for the replies, I'm not to picky just want it to work. That pin must of rusted right off on mine because part of it is still on the pedal. I do have another pedal I was going to use in my t-bucket that hinges to the floor, might take a look at that one too.
Back to top
View user's profile Send private message Classifieds Feedback
Culito
11010101


Joined: December 07, 2006
Posts: 5882
Location: Columbia Missourah
Culito is offline 

PostPosted: Thu May 10, 2007 10:23 pm    Post subject: Reply with quote

Thread hijack alert!

I was wondering if a roller pedal might be more comfortable for a 6' 5" driver...
And if a chrome one might add a few MPH...
_________________
© CJ Industries, Inc.
'64 standard w/2.0L type 4
'62 bug
johnnypan wrote:
...dont pay no attention to Culito,he's a cornhole..
Back to top
View user's profile Send private message Visit poster's website Facebook Gallery Classifieds Feedback
Campy
Samba Member


Joined: January 10, 2005
Posts: 4933
Location: Chico, CA
Campy is offline 

PostPosted: Thu May 10, 2007 10:55 pm    Post subject: Reply with quote

The pins are narrower in the center and, once, I saw a pin that had rusted clear through in the center portion.
Back to top
View user's profile Send private message Gallery Classifieds Feedback
piercedvw
Samba Member


Joined: December 28, 2006
Posts: 109
Location: BC Canada
piercedvw is offline 

PostPosted: Wed Jun 20, 2007 11:16 pm    Post subject: Reply with quote

I need a good pic of how this setup SHOULD look.
Back to top
View user's profile Send private message Gallery Classifieds Feedback
pyrOman
Fire Master


Joined: July 21, 2003
Posts: 12565
Location: Over 2002 posts deleted!
pyrOman is offline 

PostPosted: Thu Jun 21, 2007 7:34 am    Post subject: Re: Gas Pedal Hinge Reply with quote

bugboy63 wrote:
swade41 wrote:
I tried the search and came up with nothing so I'll ask.
My pedal came unatached from the floor at the hinge, it's pretty rusty and can't tell what it was suposed to look like. Is there just a pin/bolt that secures the pedal to the part on the floor ?
How can I fix this ?


depends on how picky you are i guess.
mine rusted off before i got the westy,
p.o. just used a hardware store hinge screwed in Shocked... it didn't last.
i did the same thing but bolted it in.
it does the job just fine.
Image may have been reduced in size. Click image to view fullscreen.


The Plump Truck came with a barn door hinge. REALLY a barn door hinge! Shocked

Image may have been reduced in size. Click image to view fullscreen.


Laughing
_________________
Some people are so busy being clever they don't have time enough to be wise.
Back to top
View user's profile Send private message Gallery Classifieds Feedback
Z
Samba Member


Joined: June 15, 2003
Posts: 2517
Location: galveston, tx
Z is offline 

PostPosted: Thu Jun 21, 2007 8:29 am    Post subject: Reply with quote

polo wrote:
I need to replace that little spring piece... how goes that? Pop the pin out, remove pedal, stick the spring in, replace pedal, replace pin?


I think these are relatively new from WW:

http://www.wolfsburgwest.com/cart/DetailsList.cfm?ID=211721619

http://wolfsburgwest.com/cart/DetailsList.cfm?ID=211721613

http://www.wolfsburgwest.com/cart/DetailsList.cfm?ID=211721629
Back to top
View user's profile Send private message Send e-mail Gallery Classifieds Feedback
piercedvw
Samba Member


Joined: December 28, 2006
Posts: 109
Location: BC Canada
piercedvw is offline 

PostPosted: Thu Jun 21, 2007 8:46 am    Post subject: Reply with quote

Z wrote:
polo wrote:
I need to replace that little spring piece... how goes that? Pop the pin out, remove pedal, stick the spring in, replace pedal, replace pin?


I think these are relatively new from WW:

http://www.wolfsburgwest.com/cart/DetailsList.cfm?ID=211721619

http://wolfsburgwest.com/cart/DetailsList.cfm?ID=211721613

http://www.wolfsburgwest.com/cart/DetailsList.cfm?ID=211721629



That's all the stuff I bought.. want to intall it.. replaces a home-job last owner did.. so have no "picture" to work from.
Back to top
View user's profile Send private message Gallery Classifieds Feedback
Z
Samba Member


Joined: June 15, 2003
Posts: 2517
Location: galveston, tx
Z is offline 

PostPosted: Thu Jun 21, 2007 8:51 am    Post subject: Reply with quote

piercedvw wrote:
That's all the stuff I bought.. want to intall it.. replaces a home-job last owner did.. so have no "picture" to work from.

I'll try to get a pic for you today - bet someone beats me to it, though.
Back to top
View user's profile Send private message Send e-mail Gallery Classifieds Feedback
swade41
Samba Member


Joined: April 29, 2007
Posts: 47
Location: buffalo,ny
swade41 is offline 

PostPosted: Fri Jun 22, 2007 8:23 pm    Post subject: Reply with quote

That picture of the backside of the pedal looks like the l shaped bracket is held in place by the bracket that bolts to the floor and trapped by the pin.
Back to top
View user's profile Send private message Classifieds Feedback
piercedvw
Samba Member


Joined: December 28, 2006
Posts: 109
Location: BC Canada
piercedvw is offline 

PostPosted: Sat Jun 23, 2007 9:02 am    Post subject: Reply with quote

Got it done.. will try to post pics later.
Back to top
View user's profile Send private message Gallery Classifieds Feedback
biggraham
Samba Member


Joined: March 15, 2003
Posts: 728
Location: Felton
biggraham is offline 

PostPosted: Tue Jun 26, 2007 3:19 pm    Post subject: Reply with quote

Thanks Z, those links willl be a huge help in the future,
Cheers
Smile
_________________
67 S0-42 Pop-Top Walkthru
Back to top
View user's profile Send private message Send e-mail Gallery Classifieds Feedback
Major Woody
Samba Enigma


Joined: December 04, 2002
Posts: 9016
Location: Portland, OR
Major Woody is offline 

PostPosted: Tue Jun 26, 2007 3:52 pm    Post subject: Reply with quote

The bracket is welded not bolted.
Back to top
View user's profile Send private message Gallery Classifieds Feedback
mynameismud
Samba Member


Joined: October 23, 2002
Posts: 5937
Location: Middle of a corn field
mynameismud is offline 

PostPosted: Wed Jun 27, 2007 12:10 pm    Post subject: Re: Gas Pedal Hinge Reply with quote

pyrOman wrote:
The Plump Truck came with a barn door hinge. REALLY a barn door hinge! Shocked

Image may have been reduced in size. Click image to view fullscreen.


Laughing


That's hot.. Confused
_________________
Even YOU can prevent FIRES!
Click to view image
Back to top
View user's profile Send private message Gallery Classifieds Feedback
pyrOman
Fire Master


Joined: July 21, 2003
Posts: 12565
Location: Over 2002 posts deleted!
pyrOman is offline 

PostPosted: Wed Jun 27, 2007 12:45 pm    Post subject: Re: Gas Pedal Hinge Reply with quote

mynameismud wrote:
pyrOman wrote:
The Plump Truck came with a barn door hinge. REALLY a barn door hinge! Shocked

Image may have been reduced in size. Click image to view fullscreen.


Laughing


That's hot.. Confused


You should see the rest of the truck! Laughing
_________________
Some people are so busy being clever they don't have time enough to be wise.
Back to top
View user's profile Send private message Gallery Classifieds Feedback
Display posts from previous:   
Reply to topic    Forum Index -> Split Bus All times are Mountain Standard Time/Pacific Daylight Savings Time
Page: 1, 2  Next
Page 1 of 2

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum

About | Help! | Advertise | Donate | Premium Membership | Privacy/Terms of Use | Contact Us | Site Map
Copyright © 1996-2025, Everett Barnes. All Rights Reserved.
Not affiliated with or sponsored by Volkswagen of America | Forum powered by phpBB
Links to eBay or other vendor sites may be affiliate links where the site receives compensation.