| Author |
Message |
endresta
Samba Member
Joined: January 12, 2007
Posts: 180
Location: Norway
|
 Posted: Wed Oct 21, 2009 11:12 am Post subject: Bearings front axle beam |
 |
|
| Can anybody help me with the "F" number on the lower bearing in the axle beam? The lower has a partnumber 311401301C. This number is stampled in the the same place as the partnumber so you have to look at a bearing if you have one. This can help me to get new bearings from a local shop. |
|
| Back to top |
|
 |
RTKings
Samba Member
Joined: August 04, 2006
Posts: 487
Location: Colorado
|
| Posted: Wed Oct 21, 2009 1:35 pm Post subject: |
|
|
my spares show F 12748.
Rob
_________________
'64 1500 'S' with sunroof
'64 Ghia convertible
'61 Bug
'79 Super Beetle Convertible |
|
| Back to top |
|
|
Russ Wolfe
Samba Member
Joined: October 08, 2004
Posts: 25187
Location: Central Iowa
|
| Posted: Wed Oct 21, 2009 3:41 pm Post subject: |
|
|
311401301 C
311401301 D
311401301 A
311401305
311401305 A 310-1827 A (DURKOPP)
310-2230 (DURKOPP)
310-2231 (DURKOPP)
310-1575 JP (DURKOPP)
310-2229 (DURKOPP)
Check the technical section. There is a bearing cross referance from VW numbers to OE number.
The list above did not quite copy and paste right.
_________________
Society is like stew. If you don't keep it stirred up, you end up with a lot of scum on the top!--Edward Abbey
Gary: OK. Ima poop. |
|
| Back to top |
|
|
endresta
Samba Member
Joined: January 12, 2007
Posts: 180
Location: Norway
|
| Posted: Thu Oct 22, 2009 7:45 am Post subject: |
|
|
| Thanks for helping but I did not get any further. It seems like I have to get these bearings from a vw shop. I can not find where to get this..... |
|
| Back to top |
|
|
Mike Fisher
Samba Member
Joined: January 30, 2006
Posts: 18042
Location: Eugene, OR
|
| Posted: Thu Oct 22, 2009 7:53 am Post subject: |
|
|
I got my bearings from my local Auto Parts Store. Try a Bearing Supply Co. also.
_________________
https://imgur.com/user/FisherSquareback/posts
69 FI/AT square Daily Driver
66 sunroof,67,70,71,71,71AT,72,72AT,73 Parts
two 57 oval ragtops sold
'68 Karmann Ghia sold
Society is like stew. If you don't keep it stirred up you end up with a lot of scum on the top! - Russ_Wolfe/Edward Abbey |
|
| Back to top |
|
|
Russ Wolfe
Samba Member
Joined: October 08, 2004
Posts: 25187
Location: Central Iowa
|
| Posted: Thu Oct 22, 2009 8:14 am Post subject: |
|
|
He is talking about the bearings in the beam, not the wheel bearings.
_________________
Society is like stew. If you don't keep it stirred up, you end up with a lot of scum on the top!--Edward Abbey
Gary: OK. Ima poop. |
|
| Back to top |
|
|
Mike Fisher
Samba Member
Joined: January 30, 2006
Posts: 18042
Location: Eugene, OR
|
| Posted: Thu Oct 22, 2009 8:44 am Post subject: |
|
|
Oh, the NLA needle bearings! It still seems like Bearings Inc. could sell you the appropriate needle bearings! I've got complete good 67 & 72 beams in the barn For Sale. PM me.
P.S. I just shipped the 67 transaxle to Japan.
_________________
https://imgur.com/user/FisherSquareback/posts
69 FI/AT square Daily Driver
66 sunroof,67,70,71,71,71AT,72,72AT,73 Parts
two 57 oval ragtops sold
'68 Karmann Ghia sold
Society is like stew. If you don't keep it stirred up you end up with a lot of scum on the top! - Russ_Wolfe/Edward Abbey |
|
| Back to top |
|
|
endresta
Samba Member
Joined: January 12, 2007
Posts: 180
Location: Norway
|
| Posted: Thu Oct 22, 2009 1:21 pm Post subject: |
|
|
I got a tip to a guy called Axel Stauber and Smith Lorentz in Germany but cannot find any website..... but working on it.  |
|
| Back to top |
|
|
PIMPPRIDE
Samba Member
Joined: November 19, 2003
Posts: 879
Location: Carson California
|
| Posted: Thu Oct 22, 2009 1:52 pm Post subject: |
|
|
| endresta wrote: |
| I got a tip to a guy called Axel Stauber and Smith Lorentz in Germany but cannot find any website..... but working on it. |
you can find Axel website is here, good luck - http://www.volkswarenhaus.com
Anthony / ISP WEST |
|
| Back to top |
|
|
RTKings
Samba Member
Joined: August 04, 2006
Posts: 487
Location: Colorado
|
| Posted: Thu Oct 22, 2009 1:52 pm Post subject: |
|
|
the lower bearings come up for sale occasionally. Just bought a set from Australia. Granted, the were made in Brazil by FAG, but they look good. As for the upper bearings - about as easy to find as front gravel guards.  I know of two NOS sets - one on this side of the Atlantic, and a set on the other side. 
_________________
'64 1500 'S' with sunroof
'64 Ghia convertible
'61 Bug
'79 Super Beetle Convertible |
|
| Back to top |
|
|
BerT3
Samba Member
Joined: August 18, 2002
Posts: 1569
Location: Antwerp
|
| Posted: Thu Oct 22, 2009 11:32 pm Post subject: |
|
|
I'll put up a list of the ones I have or know of
At least 20 NOS ones + bakelite inners
Regards,
BerT3 |
|
| Back to top |
|
|
endresta
Samba Member
Joined: January 12, 2007
Posts: 180
Location: Norway
|
| Posted: Fri Oct 23, 2009 9:14 am Post subject: |
|
|
| BerT3 wrote: |
I'll put up a list of the ones I have or know of
At least 20 NOS ones + bakelite inners
Regards,
BerT3 |
And do you want to ship some of these to Norway? Need only the bearings.
311401301C x 2 and 311401305 x 2..... what price? |
|
| Back to top |
|
|
RTKings
Samba Member
Joined: August 04, 2006
Posts: 487
Location: Colorado
|
| Posted: Fri Oct 23, 2009 10:56 pm Post subject: |
|
|
Bert, what DON'T you have in that amazing stash of your's???!!!! 
_________________
'64 1500 'S' with sunroof
'64 Ghia convertible
'61 Bug
'79 Super Beetle Convertible |
|
| Back to top |
|
|
BerT3
Samba Member
Joined: August 18, 2002
Posts: 1569
Location: Antwerp
|
| Posted: Sat Oct 24, 2009 12:02 am Post subject: |
|
|
| RTKings wrote: |
| Bert, what DON'T you have in that amazing stash of your's???!!!! |
Time 
BerT3 |
|
| Back to top |
|
|
BerT3
Samba Member
Joined: August 18, 2002
Posts: 1569
Location: Antwerp
|
| Posted: Sat Oct 31, 2009 1:14 am Post subject: |
|
|
These bottom ones are OE size - not oversized (which you can't install unless you have the appropriate Matra tool)
I have 18 NOS ones of those...
I have the OE size of the lower '62 only ones too if someone needs them
BerT3 |
|
| Back to top |
|
|
endresta
Samba Member
Joined: January 12, 2007
Posts: 180
Location: Norway
|
| Posted: Sat Oct 31, 2009 7:06 am Post subject: |
|
|
So that means that I need the oversized type. Well it doesnt tell in the parts catalouge..... And where is it oversized? inner or outer ring?
its not easy to know when my old dismounted lower bearing has this partnumber..... |
|
| Back to top |
|
|
BerT3
Samba Member
Joined: August 18, 2002
Posts: 1569
Location: Antwerp
|
| Posted: Sun Nov 01, 2009 3:39 am Post subject: |
|
|
| endresta wrote: |
So that means that I need the oversized type. Well it doesnt tell in the parts catalouge..... And where is it oversized? inner or outer ring?
its not easy to know when my old dismounted lower bearing has this partnumber..... |
The outer diameter is oversized - you need to ream the beam itself
Only when the bearing falls out I guess
You need OE sizes
BerT3 |
|
| Back to top |
|
|
endresta
Samba Member
Joined: January 12, 2007
Posts: 180
Location: Norway
|
| Posted: Sun Nov 01, 2009 5:30 am Post subject: |
|
|
| BerT3 wrote: |
| endresta wrote: |
So that means that I need the oversized type. Well it doesnt tell in the parts catalouge..... And where is it oversized? inner or outer ring?
its not easy to know when my old dismounted lower bearing has this partnumber..... |
The outer diameter is oversized - you need to ream the beam itself
Only when the bearing falls out I guess
You need OE sizes
BerT3 |
So that means that when I have dismounted the bearing(did not come out easy) I use the stock OE size. Well BerT3 I need 311401301C x 2 and 311401305 x 2. Am I right? |
|
| Back to top |
|
|
BerT3
Samba Member
Joined: August 18, 2002
Posts: 1569
Location: Antwerp
|
| Posted: Sun Nov 01, 2009 8:33 am Post subject: |
|
|
| Quote: |
| So that means that when I have dismounted the bearing(did not come out easy) I use the stock OE size. Well BerT3 I need 311401301C x 2 and 311401305 x 2. Am I right? |
Indeed
BerT3 |
|
| Back to top |
|
|
Tram
Samba Socialist
Joined: May 02, 2003
Posts: 23034
Location: Northwest of Normal
|
| Posted: Sun Nov 01, 2009 11:57 am Post subject: |
|
|
PM Samba member Viande with the part numbers you need- He may be able to help.
_________________
Немає виправдання для війни! Я з Україною.
| Bryan67 wrote: |
| Just my hands. And a little lube. No tools. |
Those who can- do.
Those who can't? Subaru. |
|
| Back to top |
|
|
|
